Dimplex 3088T Instruções de instalação e de utilização - Página 4
Procurar online ou descarregar pdf Instruções de instalação e de utilização para Aquecedor Dimplex 3088T. Dimplex 3088T 4 páginas. Convector heaters
Também para Dimplex 3088T: Manual de instalação e funcionamento (4 páginas), Instruções de instalação e de utilização (4 páginas)
Safety – overheat protection
For your safety, this appliance is fitted with a thermal cut-out. In the event
that the product overheats, the cut-out switches the heater off
automatically.
To bring the heater back into operation, remove the cause of the
overheating, then unplug or turn off the electrical supply to the heater for a
few minutes.
When the heater has cooled sufficiently, re-connect and switch on the
heater.
Important Notes
Although this heater is manufactured to comply with the relevant safety
standards, certain types of carpets could become discoloured by the
temperatures under a portable heater. If you are concerned about this, we
recommend that you contact the carpet manufacturer for guidance.
Alternatively, either stand the heater on a suitable base to shield the
carpet or wall-mount it – call our Helpline for further advice.
You may notice some parts of the element appearing to be hotter from
time to time because of the variable airflow through the heater. This does
not cause a safety hazard.
The heat outlet grille may become discoloured with use – this is caused by
airborne pollution and is not a fault.
The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility
(EMC) EN55014, EN60555-2 and EN60555-3 which cover the essential requirements of EEC Directives 73/23 and 89/336
Glen Dimplex UK Limited
Millbrook House
Grange Drive
Hedge End
Southampton
Hampshire. SO30 2DF
[c] Glen Dimplex UK Limited
All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Glen Dimplex UK Limited.
Cleaning and User Maintenance
WARNING – ALWAYS DISCONNECT FROM THE POWER SUPPLY
BEFORE CLEANING THE HEATER.
Do not use detergents, abrasive cleaning powder or polish of any kind on
the body of the heater.
Allow the heater to cool, then wipe with a dry cloth to remove dust and a
damp cloth (not wet) to clean off stains. Be careful not to allow moisture
into the heater.
After Sales Service
Your appliance is guaranteed for three years from the date of purchase.
We undertake to repair or exchange free of charge within this period, any
part found to be defective due to a manufacturing fault.
Your rights under this guarantee are additional to your statutory rights,
which in turn are not affected by this guarantee.
Please retain your receipt as proof of purchase.
UK customer help line (8.00AM – 6.00PM Mon-Fri; 8.30AM-1.00PM Sat)
Customer Services:
Tel.
0870 7270101
Fax. 0870 7270102
e-mail
Republic of Ireland
Tel.
01 8424833