AEO RX157E Manual de instruções - Página 3

Procurar online ou descarregar pdf Manual de instruções para Recetor AEO RX157E. AEO RX157E 9 páginas. Mini micro receiver

AEO RX14x / RX14x-E / RX15x-E Series Mini Micro Receiver

Instruction Manual

How to use ESC:

RX14x Series

Connect the positive pole of the brushed motor to"M+" and the negative pole to "M-"to replace the

throttle channel, as picture 1.1.

The integrated brushed ESC has the lock function of preventing accidental touch. After the receiver is

powered on, the throttle channel remains at the lowest position for more than 2 seconds, then this function

can be cancelled and the brushed ESC can be used normally.

RX14x-E Series

Connect the three wires of the brushless motor to the "THR". Please pay attention to the rotation direction of

the motor. If you need to change the rotation direction of the motor, please change the position of any two

of the three wires. As picture 1.2

RX15x-E Series:

Connect the three wires of the brushless motor to the "THR". Please pay attention to the rotation direction of

the motor. If you need to change the rotation direction of the motor, please change the position of any two

of the three wires. As picture 1.3.

3.Automatic frequency matching

After the receiver is powered on after 15 seconds, it still fails to complete the frequency alignment, the

receiver will enter the automatic frequency matching mode. At this time, the LED light will change from slow

flashing to fast flashing, then please complete the frequency matching according to the frequency matching

operation of the transmitter.

4.TELEM Function Introduction,

Firstly, you need a remote control with TELEM to use this TELEM function.

This function could realize real-time monitoring to battery voltage, receiver voltage, receiver signal strength

and receiver operating temperature, allowing users to master the working status of receiver and battery in

real time to avoid unexpected situations in flight.