CRU RTX430-3QR Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Invólucro CRU RTX430-3QR. CRU RTX430-3QR 16 páginas.
Também para CRU RTX430-3QR: Manual de início rápido (4 páginas)

Imprimir página

RTX430-3QR User Manual

c. To format the volume, right-click the Drive Properties Box of the drive (highlighted

yellow in Figure 1) and select New Simple Volume...

d. Unless you wish to customize the settings in these dialog prompts, click Next on the

Select Partition, Specify Volume/Partition Size, and Assign Drive Letter or Path dialog

prompts, leaving the default settings.

e. You will now see a window that allows selection of a file system. Choose NTFS and

enter a name for the new volume. Be sure to check the box labeled Quick Format,

which will ensure that the formatting process takes less than a minute.

Click Next and then Finish to start the format process. When the format is complete,

the Drive Properties Box will update to show the new volume name. The new volume

can now be found by opening a File Explorer window and clicking on This PC in the

navigation pane to the left.

Windows 8.1

a. Press WINKEY + X and then select Disk Management.

b. The drive should appear in the list of Disks in the lower pane. You may need to scroll

down to see it. If the drive is already formatted, you can identify it easily by its volume

name. If the drive is not initialized or is brand new, a window will pop up asking you to

select a partition type. Select GPT and press OK.

c. To format the volume, right-click the Drive Properties Box (highlighted in yellow in

Figure 1) and select New Simple Volume...

Figure 1. The Disk Management window in Windows 10 is very similar to the one found in Windows 8.1. The Drive

Properties Box is highlighted in yellow.