CRU RTX430-3QR Manual de início rápido - Página 3

Procurar online ou descarregar pdf Manual de início rápido para Invólucro CRU RTX430-3QR. CRU RTX430-3QR 4 páginas.
Também para CRU RTX430-3QR: Manual do utilizador (16 páginas)

Imprimir página

3 RTX Configuration

The RTX430-3QR has one USB 3.0 port (which is backwards-compatible with USB 2.0 hosts), one

eSATA port, two FireWire 800 ports, and one USB Mode Switch on the rear of the unit.

a. Choose one of the connection types and connect the applicable cable from your computer to the

corresponding port on the RTX

b. Connect the power cord to the unit and the other end to a grounded electrical outlet.

c. If you're using USB, make sure the USB Mode Switch is set to "USB 2.0" or "USB 3.0" to match the

USB connection type used to connect the RTX enclosure to your computer.

d. Flip the power switch on the rear of the RTX enclosure to turn it on.

4 RAID Configuration

You may skip this section if you purchased the RTX430-3QR with drives pre-installed. The RTX430-3QR

ships with RAID 5 as the default mode. Use the LCD Display and menu selection buttons to complete

these steps.

Following these steps will erase any data on the drives. Make a backup copy of any data you wish to

keep before changing the RAID.

a. Disconnect the RTX enclosure from the computer.

b. Insert four hard drives (preferably all the same make, model, and capacity) into the RTX enclosure

and flip the power switch on the rear of the unit.

c. After the RTX enclosure powers on, it will begin alarming and the LCD will display the error "Error:

Not a RAID Set." Press the Enter button on the front of the enclosure to silence the alarm.

d. Press the Enter button a second time and the LCD screen will ask "Make New RAID?" Press Enter

to confirm.

e. The LCD will display "Select RAID Type." Press Up or Down to cycle through to your desired RAID

type and then press Enter to confirm your selection.

The screen will display "Will Erase all Data OK?" Pressing Enter will result in the loss of all data on

the drives. Ensure all of your data is backed up, then press Enter.

g. The new configuration will be selected and RTX enclosure will reboot. The RAID is now created.

Your RTX430-3QR is almost ready to use! If you've installed your drives into the RTX enclosure, then

you will need to format them before using the RTX. See the "Usage with Windows and macOS Operating

Systems" section of the complete User Manual (available for download at

rtx430-3qr) for formatting instructions.

enclosure.

RTX430-3QR Quick Start Guide

cru-inc.com/products/rtx/