AEO Photo Lighting Strike! Manual de início rápido - Página 2
Procurar online ou descarregar pdf Manual de início rápido para Acessórios para câmaras AEO Photo Lighting Strike!. AEO Photo Lighting Strike! 4 páginas.
Imprimir página1. The camera should be mounted on a tripod. You want it stable during the exposure.
2. Mount the device in your camera's hot shoe mount with the red semi-clear window facing the
direction you are photographing. Insert the supplied plug into your camera remote shutter
interface.
3. Point the camera at the storm or in the direction you see lightning activity.
4. Set your Auto Focus feature to OFF or Disable.
5. Set the focus to infinity. (If the lightning is closer than that, you're too close to it!!!)
6. We've found that when photographing lightning at night, an f-stop of 5.6 works well.
7. Shutter speed should be long for night shots, 2-10 seconds. For daytime shots, don't exceed 1
second and you'll need a smaller aperture/ larger f-stop as well.
8. Turn the lightning trigger device power on FIRST before you power up the camera. (When the
trigger is first tuned on, it will trigger once on power up . . . not a big deal for digital
photography, but if you use film, you'll lose one frame.)
9. Avoid using your cell phone near the device while it's operating. Your lightning shutter trigger is
a sensitive device and can be triggered inadvertently by strong, nearby RF transmissions.
IMPORTANT BATTERY INFORMATION:
The LS 4.0 Lithium Series Triggers are designed to operate with a single Li-Ion 14500 3.7V rechargeable
battery ONLY. Using any other type of battery may cause damage to the charging system (PRO Models)
and the battery itself.
In accordance with postal regulations regarding the shipment of Li-Ion batteries, your AEO LS 4.0 Trigger
is shipped with a partially depleted rechargeable Li-Ion 14500 battery. Before using your device, ensure
the battery has been completely charged. Once charged, the device is designed to operate for over 180
hours continuously on a single charge.
Pro Models are equipped with a built in Li-Ion battery charger that derives power from any USB source
via a Micro-B USB connector on the RIGHT side of the device. When powered via USB, the USB LED
indicator is ORANGE during a charge cycle, GREEN when the charge cycle is complete.
Lightning Strike!
Professional Trigger 4.0