aeolus BTS-130E Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Produtos para animais de estimação aeolus BTS-130E. aeolus BTS-130E 5 páginas. Stainless steel electric bathing tub

Imprimir página

5. Put the Drain Head (H) in the Tub Basin (B), and bolt the Drain Head (H) to Drain Hose

w/Hoop (I) securely

6. Lay both Plastic Floorboards (D) and Plastic Puppy Riser (E) into the Tub Basin.

- 4 -

Operation Instructions

1. Plug in the tub.

2. To bathe large breeds or older dogs, step on the down pedal to lower the tub and open the

front door. To bathe small breeds, step on the up pedal to raise the tub to a suitable level for

user's stature (and/or by adding a booster rack).

3. Start then bath.

4. After the bath, let the water out of the tub and take the animal out.

5. Unplug the tub and clean it with a cloth.

Parts Replacement

Electric motor replacement

1. Disconnect the powder cord from the wall socket. Remove the tabletop from the frame

assembly, and set it aside. Remove the grooming arm.

2. Disconnect the electric motor cable from the motor control unit. Remove the snap rings and

the retaining bolts that hold the electric motor to the frame assembly. (See Figure 1 and 2)

3. Using help, lift he frame assembly up, and remove the entire motor assembly from the

frame.

4. Install the new motor assembly in the reverse order. Reconnect the cable to the motor

control unit.

5. Plug the power cord into a wall socket and test the table for proper operation.

Electric motor mount

snap ring

Figure 1

Electric motor

mount

Figure 2

- 5 -