Aeon Aeotec MultiSensor 6 Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Acessórios Aeon Aeotec MultiSensor 6. Aeon Aeotec MultiSensor 6 12 páginas.

You can determine the health of your Multisensor 6s connectivity to your gateway using a manual button press, hold, and

release function which is indicated by the LED color.

1. Press and hold the Multisensor 6 Action button

2. Wait until the RGB LED turns into a Purple Color

3. Release the Multisensor 6 Action Button

The RGB LED will blink its Purple color while sending ping messages to your gateway, when it has finished, it will blink 1 of

3 colors:

Red = Bad Health

Yellow = Moderate Health

Green = Great Health

Be sure to watch for the blink, as it will only blink once very quickly.

Manually Factory Reset the Multisensor 6.

This method is not fully advised unless your gateway has failed, and you do not yet have another gateway to perform a

general unpair on the Multisensor 6.

1. Press and hold the Multisensor 6 Action button

2. Wait until the RGB LED turns into a Green Color, and then release.

3. If your MultiSensor has been successfully factory reset from its previous network, the RGB LED will be active with a

colourful gradient for 3 seconds. When you press the Action Button on the MultiSensor, its green LED will blink. If the

removal was unsuccessful, the green LED will stay solid for a few seconds when you press the Action Button.

More Advanced Configurations.

You can find more advanced configurations for the Multisensor 6 in our Engineering Sheet section on our Freshdesk which

can be used to integrate the Multisensor 6 into a new gateway or software, or use it as a reference for configurations.

1. Multisensor 6 (V1.06)

Multisensor 6 (V1.07)

Technical Specifications.

Model number: ZW100

Power supply: USB DC 5V or battery power(2×CR123A batteries, 3V, 1500mAh).

Operating temperature: 0°C to 40°C/32°F to 104°F.

Measured temperature range: 10°C to 50°C/14°F to 122°F.

Accuracy: ±1°C/±1.8°F.

Measured humidity range: 20%RH to 90%RH.

Accuracy: ±3%RH (at 25°C/77°F).

(https://aeotec.freshdesk.com/helpdesk/attachments/6009584695)

(https://aeotec.freshdesk.com/helpdesk/attachments/6028954764)