3Com 3C871 Instruções de início rápido - Página 11

Procurar online ou descarregar pdf Instruções de início rápido para Modem 3Com 3C871. 3Com 3C871 16 páginas. Impact isdn external digital modem

After the TurboCom software is installed, proceed to the

"Placing and Receiving Calls" section in Chapter 2 of the

3Com Impact ISDN External Digital Modem User Guide.

Conﬁguration Using DOS

To conﬁgure the digital modem for an IBM PC or compatible

computer using DOS:

1 Create a directory on the hard drive, insert the 3Com

Impact DOS & Windows Installation Diagnostic Utilities

diskette into the PC's diskette drive, and copy all the ﬁles

from the utility diskette to the hard drive.

Copy the ﬁles to a new DOS directory. For example, to create a

directory dddd on your C drive at the C:\> DOS prompt, type:

md c:\dddd

To copy all ﬁles from the diskette to a directory \dddd at the

A:\> DOS prompt, type:

copy a:*.* c:\dddd

2 Execute INSTALL from the hard drive.

At the C:\> DOS prompt, type:

INSTALL

The conﬁguration program launches and presents the

Port Settings screen. To move the cursor around the screen,

use the [Up Arrow] and [Down Arrow] keys. To select a

parameter, use the [Space Bar].

3 Use the [Space Bar] to select the digital modem's

COM port and COM port data rate.

This sets the speed of communication between the

3Com Impact digital modem and the computer during

conﬁguration.

When you select the port, the standard interrupt (IRQ)

associated with that port is automatically chosen. Select the

COM port data rate based on the data rate required by the

destination digital modem and the maximum data rate

supported by your computer's COM port.

Configuring the 3Com Impact Digital Modem