Dimplex MILANOef EDS7001F Manual de peças e serviços - Página 10
Procurar online ou descarregar pdf Manual de peças e serviços para Fogão Dimplex MILANOef EDS7001F. Dimplex MILANOef EDS7001F 17 páginas. Dimplex milano stove parts and service manual
Também para Dimplex MILANOef EDS7001F: Manual de peças e serviços (17 páginas)
Imprimir página
ef
EDS7001F MILANO
If the stove was operating prior to servicing allow at least 10 minutes for light
bulbs and heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the
risk of electric shock or damage to persons.
TO REPLACE FLAME MOTOR/FLAME ROD
1. Do to the partial disassembly of the stove care must be taken not to
scratch any surfaces or damage any components during the repair.
2. Remove the stove pipe kit (if equipped).
3. Unscrew the two black knobs on the front of the unit by turning
counterclockwise.
4. Grasp onto the front door, gently lift up and pull the door off of the unit.
5. Remove the upper light bracket mounting screws from the top and remove
the light bracket assembly from the unit.
6. Locate the four cam locks on the side panels inside the upper corners of
the stove and turn with a large slot screwdriver so the triangle on the cam
lock is pointing up towards the top of the stove.
7. Grasp the top at both sides and gently pull to release the top.
8. Locate and remove the mirror by pulling it out of the slots being careful not
to bump or drop it.
9. Locate the flame motor and flame rod assembly, remove the motor
mounting screws with a short handled screw driver.
10. Remove the four screws from the rear panel.
11. Locate the main on/off switch mounted on the rear panel and disconnect
the wiring connections noting their original locations.
12. Slide the rear panel up approximately three inches, locate and disconnect
the wiring for the motor.
13. Remove the mounting bracket screws and pull the flame motor and flame
rod assembly out of the mounting bracket.
NOTE: When removing the flame motor some damage may occur to the
flame rod. If flame rod is damaged replace to insure proper operation.
10