Crutchfield 019 0021 Manual de instruções de instalação - Página 13

Procurar online ou descarregar pdf Manual de instruções de instalação para Sistema estéreo para automóvel Crutchfield 019 0021. Crutchfield 019 0021 14 páginas. Ford mustang 2015 complete car audio

Imprimir página

019 0021

Wire Splicing Guide

CRIMP METHOD

1. Cut factory wires behind

factory speaker harness.

3. Twist each positive pair of

wires together and insert

in crimp cap. Repeat

step for negative wires.

Factory Wire

New Speaker Wire

1-800-955-9094

TECHNICAL SUPPORT

These methods can be used to make wiring connections if no receiver or speaker wiring adaptor is available.

Wire color information (if available) can be found on the next page.

Factory harness is removed. Save

harness if it is to be reconnected in

the future by this method.

2. Strip end of each

wire back 1/2".

4. Squeeze middle of cap

for tight connection.

5. Connect new wires to

speaker with spade

connectors.

SOLDER METHOD

1. Carefully strip out a 1/2"

section on each factory

speaker wire behind the

factory speaker harness.

Factory Wires

Strip Out 1/2"

3. Heat wires first with

soldering iron, then

touch solder to

wires for solid

connections.

First

- - - - - - - -

Last

+ + + + + + + + + + + + + + + +

+ + + + + +

New speaker wires are spliced into

factory wires behind harness.

2. Twist wires from new

speaker to stripped

sections of factory wires

as shown making sure

polarity is correct.

- - - - - -

Negative Wires

New Wires

+ + + + + + + +

+ + +

Positive Wires

4. Wrap wiring connections

with electrical tape.

5. Connect new wires to

speaker with spade

connectors.