Crutchfield POWERALL 860PBJS32G Manual do Proprietário

Procurar online ou descarregar pdf Manual do Proprietário para Acessórios Crutchfield POWERALL 860PBJS32G. Crutchfield POWERALL 860PBJS32G 6 páginas. Portable, battery jump starter, led flashlight

Imprimir página
I
P(!)WER
ALL
PORTABLE POWER BANK
BATTERY JUMP STARTER
LED FLASHLIGHT
OWNER'S MANUAL
Thank you fo
r
pu rchasing the Powera ll. Before operating your new
device,
please read this owner's manual carefu lly.
Th
is
manual
will
inform
you of the Powerall's specifications and proper operation
procedures,
safety warnings and other useful information
.
504-0220064-12
Product Layout
Main Unit
On/Off
Button
Bright LED
Light
Accessories
Recharging Port
Battery Indicating Lights
USB Output
Heavy-Duty Jump
Start Cables
AC
Adapter Charger
DC Adapter
Charger
USB Charging Cable
Micro
USB
I phone 4
I
4S
I
ph
one 5
I
5S
"Actual
product
and
accessories may
slightly
vary from the pictures
shown above.
Battery Capacity LED Indicator
Press the Power button lightly to check the remaining battery capacity.
I
indicator
lights
1~1
5
Flashing
ll
1
Solid oNII2Solid oNII3Solid oNII4SohdONII5solld oN I
I
BatteryCapacity
i~~~~~[~~JI
100%
I
While the Powerall is being charged, the indicator lights will flash one
by one until it's at maximum charge (All 5 indicator lights will stay on
when the Powerall is fully charged}.
How to Jump Start a Vehicle Battery:
1. Make sure the battery capacity of the Powerall is above
50%
(At least 3 indicator lights stay ON).
2
.
Connect the jump start cable to the drained battery of the vehicle
.
Connect red clamp to the positive
"+"
terminal and black clamp to
the negative
"-"
terminal.
3.
Connect the jump start
cable
to the proper socket of the Powerall.
4. Now attempt to
crank
start the engine. If engine does not
start,
disconnect the jumper cables and wait
at
least 10 seconds before
attempting to start the engine again
.
5. Disconnect the jump start cable from the Powerall within 10
seconds after the engine has been successfully
started.
Recommended For Use With 24 Volt Vehicles Only.
NOT INTEN DED FOR 12 VOLT
VEHICLES.
DO NOT US
E
ON 12 VOLT VE
HI
CLES
A
S IT MAY CAUSE DAMAGE
TO T HE VE
HICLE.
lt,.
WARNING!
Do not touch the red and black clamps together
or connect both to the same piece of metal to prevent physical
injury
and damage to the vehicle.
Do not use the jump start cable for any other purpose
other
than
jump starting the vehicle.
KEEP AWAY FROM CHILDREN AT ALL TIMES!
How to Turn On the LED Light:
Press and hold the Power button
for 3 seconds
to turn on the LED
light. Once the LED light
is
turned
on,
pressing the power button will
cycle
through
additional
modes until you press
and
hold the Power Button
for 3 seconds to exit the cycle and turn the LED light
OFF.
Solid
light~
Strobe
light~
SOS flashing
1'
~----
-
-
------------
.-!t
Charging Mobile Electronic Devices
The Powerall has two 5V USB ports
and includes one
USB
adapter
cable with multiple types of
charging adapter
plugs for
various
different electronic
devices.
How to Charge Electronic
Device:
1.
Make sure the
electronic
device is 5V powered
.
2.
Connect the USB adapter
cable
to
one of
the USB
ports
on
the Powerall.
3.
Plug the compatible charging adapter plug into the
electronic
device.
4.
Press the Power button to
start charging
the electronic
device.
NOTE
: Both USB ports
can
be used to
charge
two separate
electronic devices together
at the same time.
Either USB ports will
accept standard
USB cables
included
with your
electronic
device.
How to Charge the Powerall:
Use
only
the supplied AC
adapter or
the DC
adapter
to
charge
the Powerall.
&
WARNING! Any
other
chargers may
cause
possible damage
and or reduce the service life of the Powerall.
Specifications
Battery
Capacity:
32,000
mAh
Battery Life
Cycles: >
1000
Outputs: 2
x
5V
I
2.1
A USB
Input: AC
100-240V
,
DC 25 .5V
I
1A
Jump Start Current: 800A
Dimensions: 203 x 96 x 40mm
LED Lifespan: 100,000 hours
LED Energy: 1 w
LED Lumens: 86 Lm