Aeon Labs Aeotec Manual
Procurar online ou descarregar pdf Manual para Controlador Aeon Labs Aeotec. Aeon Labs Aeotec 9 páginas. Home energy meter
Também para Aeon Labs Aeotec: Manual do utilizador (7 páginas), Manual do utilizador (11 páginas)
Imprimir página
Aeon Labs
Home Energy Meter (C3 60A)
SKU: AEOEZW095C3A60
Quickstart
This is a Smart Meter for Europe. To run this device please connect it to your mains power supply. To add this device to your network execute the following
action:
- Push the button on backside
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer,
distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this
equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and
every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is
not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-
Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this
device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level
of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Product Description
Installed in an electricity box, the energy meter will monitor the total consumption of electricity used by an entire building. And its
intelligent clamps will report that energy use back to your Z-Wave gateway or controller, in watts or kilowatt-hours, and in real time. So
you can see how much electricity you really use and when you use it.