Aeon Labs AEO HEM2-100A Manual de início rápido

Procurar online ou descarregar pdf Manual de início rápido para Instrumentos de medição Aeon Labs AEO HEM2-100A. Aeon Labs AEO HEM2-100A 11 páginas. Z-wave clamp power meter 2nd generation - two clamps max. 100 ampere

Imprimir página

Image not readable or empty

images/manufacturers/aeon%20labs%20logo.png

AEO_HEM2-100A

Z-Wave Clamp

Power Meter 2nd

Generation - two

clamps max. 100

Ampere

Firmware Version : 1.5

Quick Start

This device is a Z-Wave Sensor.

Single click the little button on the backside to include or exclude the device.

Please refer to the chapters below for detailed information about all aspects of the products usage.

What is Z-Wave?

This device is equipped with wireless communication complying to the Z-Wave standard. Z-Wave is the

international standard for wireless communication in smart homes and buildings. It is using the

frequency of 868.42 MHz to realize a very stable and secure communication. Each message is reconfirmed

(two-way communication) and every mains powered node can act as a repeater for other nodes (meshed

network) in case the receiver is not in direct wireless range of the transmitter.

Z-Wave differentiates between Controllers and Slaves. Slaves are either sensors (S) transmitting metered or

measured data or actuators (A) capable to execute an action. Controllers are either static mains powered

controllers (C) also referred to as gateways or mobile battery operated remote controls (R). This results in a

number of possible communication patterns within a Z-Wave network that are partly or completely supported

by a specific device.

1. Controllers control actuators