Dimplex RLG20FC Manual de serviço - Página 4
Procurar online ou descarregar pdf Manual de serviço para Acessórios para lareiras Dimplex RLG20FC. Dimplex RLG20FC 18 páginas. 20 electric log set
Também para Dimplex RLG20FC: Manual de instruções (15 páginas)
Imprimir página
RLG25
Manual Control
The manual controls for the Revillusion are located on the
right-front leg of the log grate.
Power
Press to turn the flame effect on and activate the
previous heat setting (Off, Low, or High). Press again
to put the unit in standby mode.
Heat
• Heat On
Press to set the heat to Low (indicated by 1 short
beep). Press again to set the heat to High (indicated
by 2 short beeps).
• Heat Off
Press to turn heat Off (indicated by 1 long beep).
!
NOTE: After the heater is switched off, the fan will
continue on for 60 seconds before turning off. The
log LEDs remain On when the heater is ON and the
flame effect is Off.
Color Themes
Press multiple times to change the LED lights from:
flame base yellow, flame base blue, flame base
yellow with yellow 360 LEDs, flame base blue with
360 LEDs. (Feature is active only when the flame
effect is On.)
Brightness
Press multiple times to toggle the log set LEDs
through its four brightness settings.
Remote Control
The fireplace is supplied with a multi-function remote con-
trol.
The remote control has a range of approximately 30ft (9m).
To operate correctly, the remote control must be pointed
toward the front of the unit.
4
Power
Press to activate the current standby state (On/Off).
• Standby State On
Press to turn everything Off. Press again to active the
previous flame effect state.
• Standby State Off
Press to activate the previous flame effect state.
- If the flame effect was On, the previous heat setting
will be activated (High, Low, or Off).
- If the flame effect was Off, the previous heat setting
will be activated (High or Low).
Press again to turn everything Off.
Flame
Press to light the back log, grate log, and ember mat,
and start the flame effect.
Heat
Heat On
Press to set the heat to Low (indicated by 1 short
beep). Press again to set the heat to High (indicated
by 2 short beeps).
• Heat Off
Press to turn heat Off (indicated by 1 long beep).
!
NOTE: After the heater is switched off, the fan will
continue on for 60 seconds before turning off. The
log LEDs remain On when the heater is ON and the
flame effect is Off.
360
Light
o
Press multiple times to change the LEDs on the
sides and back of the unit from natural yellow
flickering to yellow solid to white flickering to white
solid to Off. (Feature is active only when the flame
effect is On.)
Brightness
Press multiple times to toggle the log set LEDs
through its four brightness settings.
Color Themes
Press multiple times to change the flame base colors
from Yellow to Blue to Off. (Feature is active only
when the flame effect is On.)
www.dimplex.com