Pioneer AVH-P6600DVD Manual de instalação - Página 3
Procurar online ou descarregar pdf Manual de instalação para Recetor para automóvel Pioneer AVH-P6600DVD. Pioneer AVH-P6600DVD 9 páginas. 2004 mobile entertainment systems
Também para Pioneer AVH-P6600DVD: Manual do Proprietário (34 páginas), Manual do utilizador (24 páginas), Manual de operação (4 páginas)
Connecting the Units
When connecting with a rear view camera
When using this product with a rear view camera, automatic switching to video from a rear
view camera when the gear shift is moved to REVERSE (R) position is possible.
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
• The screen image may appear reversed.
• The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing into a tight
parking spot. Do not use this function for entertainment purposes.
• The object in rear view may appear closer or more distant than in reality.
Hide-away unit
CAUTION
You must use a camera
which outputs mirror
RCA cable
reversed images.
(sold separately)
rear view camera
To video output
10 cm
8 m
Extension lead (supplied)
(3-7/8 in.)
(26 ft. 3 in.)
Violet/white
Fuse resistor
Of the two lead wires connected to the back
lamp, connect the one in which the voltage
changes when the gear shift is in the REVERSE
(R) position. This connection enables the unit to
sense whether the car is moving forwards or
backwards.
Connection method
1.
Clamp the lead.
2. Clamp firmly with
needle-nosed
pliers.
Note:
• It is necessary to set to BACK UP CAMERA in SETUP
when connecting the rear view camera.
When connecting with a multi-channel processor
26 pin cable input
AV-BUS input (Blue)
40 cm (1 ft. 4 in.)
IP-BUS input (Blue)
Blue
15 cm
Blue
(5-7/8 in.)
This product
IP-BUS cable (supplied with
multi-channel processor)
23 cm (9 in.)
Subwoofer output
or non fading output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
RCA cable (supplied with
multi-channel processor)
Optical cable connection box
(supplied with multi-channel processor)
Optical cable (supplied with
Blue
multi-channel processor)
Multi-channel processor
(DEQ-P8000)
(sold separately)
If you use this unit with navigation unit
(e.g. AVIC-88DVD) and multi-channel
processor (e.g. DEQ-P8000), be sure to
connect a guide speaker to this unit's
Black
Blue
guide speaker output terminal.
IP-BUS cable
Black
Blue
(supplied with TV tuner)
IP-BUS cable
Hide-away TV tuner
(e.g. GEX-P6400TV)
(sold separately)
A V -BUS cable (supplied
Black
with TV tuner)
Fig. 4
Connecting and installing the
optical cable connection box
Yellow
WARNING
• Avoid installing this unit in such a location where
the operation of safety devices such as airbags is
Guide speaker output
prevented by this unit. Otherwise, there is a danger
(GUIDE SP OUTPUT)
of a fatal accident.
• Avoid installing this unit in such a location where
15 cm
the operation of the brake may be prevented.
Otherwise, it may result in a traffic accident.
• Fix this unit securely with the velcro tape or lock
tie. If this unit is loose, it disturbs driving stability,
which may result in a traffic accident.
CAUTION
• Install this unit using only the parts supplied with
this unit. If other parts are used, this unit may be
damaged or could dismount itself, which leads to
an accident or trouble.
• Do not install this unit near the doors where rain-
water is likely to be spilled on the unit. Incursion
of water into the unit may cause smoke or fire.
Black
Connecting the optical cable
1. Connect the optical cable and
ground lead to the main unit.
(Fig. 6)
Connect the optical cable so that it does
not protrude from the unit, as shown in
Guide speaker
(e.g. CD-TS37GP)
the illustration. Fasten the ground lead
(sold separatly)
to the protrusion on the back of the
unit.
Screw
Fig. 6
26 pin cable
2. Connect the optical cable to the
optical cable connection box.
Navigation unit
(Fig. 7)
(e.g. A VIC-88DVD)
(sold separately)
Multi-CD player
Fig. 5
(sold separately)
When connecting the external video component and the display
Optical cable
Fig. 7
Installing the optical cable
connection box
• When installing the optical cable
connection box with the velcro
tape. (Fig. 8)
Install the optical cable connection box
using the velcro tape in the ample
space of the console box.
Velcro tape (hard)
Velcro tape (soft)
• It is necessary to set to AV INPUT in SET UP when connecting the external video com-
Fig. 8
ponent.
• When installing the optical cable
When using a display connected to rear video output
connection box with the lock tie.
This product's rear video output is for connection of a display to enable passengers in the
(Fig. 9)
rear seats to watch the DVD or Video CD.
Wrap the optical cable and connection
box with the protection tape and fasten
with the power code using the lock tie.
WARNING:
• NEVER install the display in a location that enables the Driver to watch the DVD or Video CD while
Wrap with the protection tape
Driving.
• NEVER connect rear audio output (REAR MONITOR OUT) to sold separately power amp.
Fasten with the lock tie
Fig. 9
<ENGLISH>
Hide-away unit
RCA cables
(sold separately)
To audio outputs
External video
component
(sold separately)
To video output
RCA cables
(sold separately)
To audio inputs
Display with
RCA input jacks
To video input
Fig. 10