Pioneer AVIC-HD3 Manual do hardware - Página 10

Procurar online ou descarregar pdf Manual do hardware para Recetor para automóvel Pioneer AVIC-HD3. Pioneer AVIC-HD3 22 páginas. Dvd av navigation head-unit
Também para Pioneer AVIC-HD3: Manual do hardware (22 páginas), Manual de início rápido (2 páginas)

Imprimir página

Notes for the LCD Screen

To protect the LCD screen

r Do not allow direct sunlight to fall on the LCD

screen when this navigation system is not

being used. Extended exposure to direct sun-

light can result in LCD screen malfunction

due to the resulting high temperatures.

r When using a mobile phone, keep the aerial of

the mobile phone away from the display to

prevent video disruption with disturbances

such as spots or coloured stripes.

r Never touch the LCD screen with anything

besides your finger when operating the Touch

Panel functions. The LCD screen can scratch

easily. (The stylus is supplied for special cali-

brations. Do not use the stylus for normal

operation.)

ò For details about handling the LCD panel Þ

Page 16

For comfortable LCD viewing

Due to its construction, the viewing angle of the

LCD screen is limited. The viewing angle can be

increased, however, by using [Brightness] to

adjust the black density of the video. When using

for the first time, adjust the black density in

accordance with the viewing angle to adjust for

clear viewing. [Dimmer] can also be used to

adjust the brightness of the LCD screen itself to

suit your personal preference.

Notes for Internal Memory

Before removing the vehicle bat-

tery

If the battery is disconnected or discharged, the

memory will be erased and must be repro-

grammed.

ò For details, refer to "Returning the Navigation

System to the Default or Factory Settings" in

the operation manual.

Resetting the microprocessor

Pressing the RESET button mainly clears the

settings for the AV source without clearing

all the items of navigation functions. Please

see section "Returning the Navigation Sys-

tem to the Default or Factory Settings" of the

operation manual before clearing.

Pressing the RESET button lets you reset the

microprocessor to its initial settings without

changing the condition memory.

ò "Condition memory" Þ Page 16

The microprocessor must be reset under the fol-

lowing conditions:

— Prior to using this navigation system for the

first time after installation.

— If the product fails to operate properly.

— If there appear to be problems with the

operation of the system.

— When changing the combination of the

equipment.

— When adding/removing additional products

that connect to the navigation system.

Turn the ignition switch OFF.

Press the RESET button with a pen tip or

other pointed instrument.

RESET button

r If you have connected other equipment (for

example, a TV tuner) to this navigation system,

be sure to reset that equipment, too.