Pioneer AVIC-N1 Manual do hardware - Página 21
Procurar online ou descarregar pdf Manual do hardware para Recetor para automóvel Pioneer AVIC-N1. Pioneer AVIC-N1 28 páginas. Technical menu
Também para Pioneer AVIC-N1: Manual do Proprietário (34 páginas), Manual do utilizador (24 páginas), Manual (10 páginas)
Imprimir página
Appendix
Troubleshooting
➲ About troubleshooting other than description
below ➞ Appendix of the Operation Manual
Symptom
There's no picture.
The icon
is dis-
played, and operation
is not possible.
The picture stops
(pauses) and the unit
cannot be operated.
The picture is
stretched, the aspect is
incorrect.
Rear display picture
disappears.
Nothing is displayed
and the touch panel
keys cannot use.
LCD Panel knocking
against your vehicle's
console or dashboard.
Video image appears
grainy.
Cause
The parking brake cord is not connected.
The parking brake is not applied.
The operation is prohibited for the disc.
The operation is not compatible with the
disc's organization.
Reading of data has become impossible
during playback.
The aspect setting is incorrect for the dis-
play.
• The source disc being listened to with the
product has been ejected.
• The REAR button was pressed and REAR
ON mode switched off.
• There was a problem with the rear display
or a faulty wiring connection, for example.
• Rear View is selected on the screen.
• When the shift lever is in [R], displays rear
view camera images. (When "NAVI" is
selected in REAR DISP menu.)
The setting for the rear view camera is in-
correct.
The shift lever was placed in [R] when the
rear view camera was not connected.
Incorrect setting of angle.
This happens when videos are viewed in
CINEMA or ZOOM mode.
Action (See)
Connect a parking brake cord, and apply the
parking brake.
Connect a parking brake cord, and apply the
parking brake.
This operation is not possible.
This operation is not possible.
After pressing 7 7 7 7 once, start playback once
more.
Select the appropriate setting for your dis-
play. (Page 15)
• Before ejecting the disc, switch the
source. This problem may occur when cer-
tain connection methods are used.
• Press the REAR button to turn REAR ON
mode on.
• Check the rear display and its connection.
• Select view mode other than Rear View.
• Move the shift lever other than turn [R] po-
sition. (Select SOURCE in REAR DISP
menu.)
Connect a rear view camera correctly.
Press NAVI/AV button to return to the
source display and then select the correct
setting for CAMERA.
➲ About CAMERA setting
Manual
Press ANGLE (+/–) to adjust the LCD an-
gle. Forcibly adjusting the LCD panel by
hand may damage it.
Select a different mode to view videos.
➞
Operation
19