Pioneer DEH-150MP Manual do Proprietário - Página 4
Procurar online ou descarregar pdf Manual do Proprietário para Recetor para automóvel Pioneer DEH-150MP. Pioneer DEH-150MP 44 páginas. Cd rds receiver
Imprimir página
Section
Operating this unit
02
Part
Operation
FUNC-
k
Press to select functions.
TION
Press to display the disc title,
track title, folder, or file list de-
pending on the source.
LIST/
l
Press to display the list de-
ENTER
pending on the source.
While in the operating menu,
press to control functions.
Display indication
1
2
3
7
Indicator
State
The list function is being oper-
1
(list)
ated.
Sub infor-
2
mation sec-
Sub information is displayed.
tion
The sound retriever function
3
(sound re-
is on.
triever)
4
LOC
Local seek tuning is on.
5
(repeat)
Track or folder repeat is on.
(ran-
6
Random play is on.
dom)
4
En
Indicator
State
! Tuner: band and fre-
Main infor-
quency
7
mation sec-
! CD player: elapsed play-
tion
back time and text infor-
mation
Appears when a lower tier of
8
folder or menu exists.
Set up menu
When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
4 6
You can set up the menu options below.
5
1
After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
8
2
Turn M.C. to switch to YES.
# If you do not operate for 30 seconds, the set up
menu will not be displayed.
# If you prefer not to set up at this time, turn M.C.
to switch to NO. Press to select.
If you select NO, you cannot set up in the set up
menu.
3
Press M.C. to select.
4
Complete the procedure outlined below
to set the menu.
To proceed to the next menu option, you need to
confirm your selection.
CLOCK SET (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
QUIT appears.
Operating this unit
5
To finish your settings, turn M.C. to select
YES.
# If you prefer to change your setting again, turn
M.C. to switch to NO. Press to select.
6
Press M.C. to select.
Notes
! You can set up the menu options from the
system menu. For details about the settings,
refer to System menu on page 7.
! You can cancel set up menu by pressing
SRC/OFF.
Basic operations
Important
! Handle gently when removing or attaching
the front panel.
! Avoid subjecting the front panel to excessive
shock.
! Keep the front panel out of direct sunlight
and high temperatures.
! To avoid damaging the device or vehicle inte-
rior, remove any cables and devices attached
to the front panel before detaching it.
Removing the front panel to protect your unit from
theft
1 Press the detach button to release the front
panel.
2 Push the front panel upward (M) and then pull
it toward (N) you.
3 Always keep the detached front panel in a pro-
tection device such as a protection case.
Re-attaching the front panel
1 Slide the front panel to the left.
Make sure to insert the tabs on the left side of
the head unit into the slots on the front panel.
2 Press the right side of the front panel until it is
firmly seated.
If you cannot attach the front panel to the
head unit successfully, make sure that you are
placing the front panel onto the head unit cor-
rectly. Forcing the front panel into place may
result in damage to the front panel or head
unit.
Turning the unit on
1 Press SRC/OFF to turn the unit on.
Turning the unit off
1 Press and hold SRC/OFF until the unit turns
off.