Arista C-360 Manual de início rápido - Página 3

Procurar online ou descarregar pdf Manual de início rápido para Router de rede Arista C-360. Arista C-360 4 páginas.
Também para Arista C-360: Manual de início rápido (14 páginas)

Imprimir página
Arista C-360 Manual de início rápido
Ceiling Mounting the C-360
1. Affix bracket to T - Grid.
4. Rotate the AP such that the center mounting post
fits in to the center notch on the bracket.
Wall Mount:
If needed, the wall mounting accessory SKU (MNT-AP-FLAT-14CM) can be ordered separately.
For more information on the mounting instructions for the wall mount, visit
post/new-wall-mount.
Getting the C-360 Online
Step 1: Power up
Plug one end of an Ethernet cable into the PoE+ (802.3bt or 802.3at) switch or injector and the other end
into the Ethernet/PoE+ port on the C-360. Ensure the PoE+ source you are using is turned ON, or use a
compatible power adaptor to power the C-360.
Warning: If you are not using PoE+, ensure that you use only an AC power adaptor supported by the
C-360 access point (AP). This product is intended to be supplied by a Listed Direct Plug-In Power Unit
marked "Class 2", Listed Power Adapter or DC power source marked "L.P.S. " (or "Limited Power Source") and
rated from 12 V DC, 3.3 A minimum.
2. Rotate bracket to snap
on to T- Grid.
5. Ensure that all the mounting posts on the rear-
side of the AP are snapped in to the respective
notches on the bracket.
3. Place the first mounting post on the
rear-side of the AP on to the lower
notch of the bracket.
https://wifihelp.arista.com/