Pioneer DEH-3900MP Manual de operação - Página 3

Procurar online ou descarregar pdf Manual de operação para Recetor para automóvel Pioneer DEH-3900MP. Pioneer DEH-3900MP 20 páginas. Cd rds receiver
Também para Pioneer DEH-3900MP: Manual de instalação (9 páginas)

Imprimir página

1. Connecting the Units

MAN-DEH-3900MP-GB.fm Page 3 Monday, January 15, 2007 3:45 PM

Installation

1. Insert the mounting sleeve into the dashboard.

• When installing in a shallow space, use a supplied mounting sleeve. If there is

enough space behind the unit, use factory supplied mounting sleeve.

2. Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°)

into place.

3. Install the unit as illustrated.

Removing the Unit

1. Extend top and bottom of the trim ring outwards to remove the trim ring. (When

reattaching the trim ring, point the side with a groove downwards and attach it.)

• It becomes easy to remove the trim ring if the front panel is released.

Trim ring

2. Insert the supplied extraction keys into both sides of the unit until they click into

place.

3. Pull the unit out of the dashboard.

DIN Rear-mount

1. Extend top and bottom of the trim ring outwards to remove the trim ring. (When

reattaching the trim ring, point the side with a groove downwards and attach it.)

• It becomes easy to remove the trim ring if the front panel is released.

Trim ring

2. Determine the appropriate position where the holes on the bracket and the side

of the unit match.

3. Tighten two screws on each side.

• Use either truss screws (5 mm x 8 mm) or flush surface screws (5 mm x 9 mm),

depending on the shape of screw holes in the bracket.

Screw

Dashboard or Console

Factory radio mounting bracket