Pioneer DEH-P520 Manual de instalação - Página 14

Procurar online ou descarregar pdf Manual de instalação para Recetor para automóvel Pioneer DEH-P520. Pioneer DEH-P520 40 páginas.

DFS Alarm Installation

STARTER CUT-OFF (Blue/brown)

The blue/brown lead will provide a continuous +12 V output while alarm is sounding and

for 30 minutes after initial trigger, up to 5 consecutive triggers. This lead has a maximum

current capability of 500 mA and can be used to trigger a relay to disable the starter.

Note:

• In order for the "DFS Alarm" to operate when a window is broken, connect this product's white/red

(ALARM SENSOR) lead to glass sensor securely.

• In order for the "DFS Alarm" to operate when a door is forced open, connect this product's

white/yellow (DOOR SWITCH) lead securely.

30 amp relay (sold separately) required to disable starter.

• Connect blue/brown lead to one side of relay coil.

• Connect other side of coil to ground.

• Locate starter wire under dash, near steering column.

• Cut starter wire and try to start vehicle to verify wire is correct.

• Connect key side of cut wire to normally closed pin.

• Connect starter side of cut wire to common pin.

30 A "SPDT" RELAY

(sold separately)

To Starter

See the

"Avoiding Trouble".

Blue/brown

White/orange (refer to "DOOR LOCK".)

White/red (refer to "ALARM SENSOR".)

From Ignition

Switch

Brown (refer to "ALARM OUTPUT".)

White/yellow (refer to "DOOR SWITCH".)

This Product

Fig. 9