Pioneer MVH-280FD Manual de serviço - Página 9

Procurar online ou descarregar pdf Manual de serviço para Recetor para automóvel Pioneer MVH-280FD. Pioneer MVH-280FD 44 páginas. Rds media center receiver

Pioneer MVH-280FD Manual de serviço
5

5.2 ERROR CODE LIST

Common
AMP ERROR
This unit fails to operate or the speaker
connection is incorrect; the protection
circuit is activated.
– Check the speaker connection.
– Check the power IC and its peripheral circuit.
NO XXXX (NO TITLE, for example)
There is no embedded text information.
– Switch the display or play another
track/file.
USB device/iPod
FORMAT READ
Sometimes there is a delay between the
start of playback and when you start to
hear any sound.
– Wait until the message disappears and
you hear sound.
NO AUDIO
There are no songs.
– Transfer the audio files to the USB
device and connect.
The connected USB device has security
enabled.
– Follow the USB device instructions to
disable the security.
SKIPPED
The connected USB device contains
DRM protected files.
– The protected files are skipped.
PROTECT
All the files on the connected USB
device are embedded with DRM.
– Replace the USB device.
N/A USB
The connected USB device is not
supported by this unit.
– Disconnect your device and replace it
with a compatible USB device.
HUB ERROR
The USB device connected via a USB
hub is not supported by this unit.
– Connect the USB device directly to this
unit using a USB cable.
5
6
CHECK USB
The USB connector or USB cable has
short-circuited.
– Check that the USB connector or USB
The connected USB device consumes
more than maximum allowable current.
– Disconnect the USB device and do not
The iPod operates correctly but does
not charge.
– Make sure the connection cable for
ERROR-19
Communication failed.
– Perform one of the following
• Turn the ignition switch OFF and
• Disconnect the USB device.
• Change to a different source.
iPod failure.
–Disconnect the cable from the iPod.
ERROR-23
USB device was not formatted properly.
– Format the USB device with FAT12,
ERROR-16
The iPod firmware version is old.
– Update the iPod version.
iPod failure.
– Disconnect the cable from the iPod.
STOP
There are no songs in the current list.
– Select a list that contains songs.
NOT FOUND
No related songs.
– Transfer songs to the iPod.
MVH-280FD/XNEW5
6
7
cable is not caught in something or
damaged.
use it. Turn the ignition switch OFF
and back to ACC or ON. Connect only
compliant USB devices.
the iPod has not shorted out (e.g., not
caught in metal objects). After
checking, turn the ignition switch OFF
and back to ON, or disconnect the
iPod and reconnect.
operations, then return to the USB
source.
back to ON.
Once the iPod's main menu is
displayed, reconnect the iPod and
reset it.
FAT16 or FAT32.
Once the iPod's main menu is
displayed, reconnect the iPod and
reset it.
7
8
A
B
C
D
E
F
9
8