Pioneer MXT-X366BT Manual do Proprietário - Página 3

Procurar online ou descarregar pdf Manual do Proprietário para Recetor para automóvel Pioneer MXT-X366BT. Pioneer MXT-X366BT 25 páginas. Complete car audio package digital media receiver and 16cm 2-way speakers
Também para Pioneer MXT-X366BT: Manual do Proprietário (49 páginas)

Imprimir página

Using this unit

MXT-X366BT

Press to start talking to the caller while

using the phone.

FUNCTION

MXT-X166UI

Press to select functions.

LIST/ENTER

Press to display the list depending on the

source.

While in the operating menu, press to con-

trol functions.

Display indication

7 9

(list)

(iPod control)

This unit's iPod function is operated from

your iPod.

Sub information section

TA (traffic announcements)

TP (traffic program identification)

(sound retriever)

LOC (local seek tuning)

(repeat)

(random/shuffle)

(auto answer)

Only for MXT-X366BT

Shows when the automatic answering func-

tion is on.

Main information section

! Tuner: band and frequency

! RDS: program service name, PTY infor-

mation and other literal information

! USB storage device and iPod: elapsed

playback time and text information

(Bluetooth indicator)

Only for MXT-X366BT

Appears when a lower tier of folder or menu

exists.

Set up menu

After installation of this unit, turn the

ignition switch to ON.

SET UP appears.

Turn M.C. to switch to YES.

# If you do not use the unit for 30 seconds, the set

up menu will not be displayed.

# If you prefer not to set up at this time, turn M.C.

to switch to NO.

Press M.C. to select.

Follow these steps to set the menu.

To proceed to the next menu option, you need to

confirm your selection.

CLOCK SET (setting the clock)

1 Turn M.C. to adjust hour.

2 Press M.C. to select minute.

3 Turn M.C. to adjust minute.

4 Press M.C. to confirm the selection.

Using this unit

FM STEP (FM tuning step)

Use FM STEP to set FM tuning step options (seek

step settings).

1 Turn M.C. to select the FM tuning step.

100 (100 kHz)—50 (50 kHz)

2 Press M.C. to confirm the selection.

! The manual tuning step is fixed at 50 kHz.

AM STEP (AM tuning step)/MW STEP (MW tuning

step)

Use AM STEP/MW STEP to set AM/MW tuning

step options (seek step and manual tuning step

settings).

1 Turn M.C. to select the AM/MW tuning step.

9 (9 kHz)—10 (10 kHz)

2 Press M.C. to confirm the selection.

QUIT appears.

To finish your settings, turn M.C. to select

YES.

# If you prefer to change your setting again, turn

M.C. to switch to NO.

Press M.C. to select.

Notes

! You can set up the menu options from the

system menu and initial menu. For details

about the settings, refer to System menu on

page 13 and Initial menu on page 14.

! You can cancel set up menu by pressing

SRC/OFF.

Basic operations

Important

! Handle the front panel with care when re-

moving or attaching it.

! Avoid subjecting the front panel to excessive

shock.

! Keep the front panel out of direct sunlight

and high temperatures.

! To avoid damaging the device or vehicle inte-

rior, remove any cables and devices attached

to the front panel before detaching it.

Removing the front panel

1 Press the detach button to release the front

panel.

2 Push the front panel upward (M) and then pull

it toward (N) you.

3 Always store the detached front panel in a pro-

tective case or bag.

Re-attaching the front panel

1 Slide the front panel to the left.

2 Press the right side of the front panel until it is

firmly seated.

Forcing the front panel into place may result in

damage to the front panel or head unit.

Turning the unit on

1 Press SRC/OFF to turn the unit on.

Turning the unit off

1 Press and hold SRC/OFF until the unit turns

off.

Section