Pioneer YPM-2106ZF Manual de serviço - Página 22

Procurar online ou descarregar pdf Manual de serviço para Recetor para automóvel Pioneer YPM-2106ZF. Pioneer YPM-2106ZF 43 páginas. Cd players

Imprimir página
Pioneer YPM-2106ZF Manual de serviço
YPM-2306ZF
(4) Display of Operational Status (CPOINT) during Setup
Status No. Contents
00
CD+5V ON process in progress.
01
Servo LSI initialization (1/3) in progress.
02
Servo LSI CRAM initialization in progress.
03
Servo LSI initialization (2/3) in progress.
04
Offset adjustment (1/3) in progress.
05
Offset adjustment (2/3) in progress.
06
Offset adjustment (3/3) in progress.
07
FZD adjustment in progress.
08
Servo LSI initialization (3/3) in progress.
10
Carriage move to home position started.
11
Carriage move to home position started.
12
Carriage is moving toward inner diameter.
13
Carriage is moving toward outer diameter.
14
Carriage outer kick in progress.
15
Carriage outer diameter feed (1 second) in progress.
20
Servo close started.
21
Pre-processing for focus search started.
22
Spindle rotation and focus search started.
23
Waiting for focus close (XSI=Low).
24
Standing by after focus close is over.
25
Focus search preprocessing is in
progress while setup protection is turned on.
26
Focus search preprocessing is in
progress while focus recovery is turned on.
27
Wait time after focus close is set up.
28
Standing by after focus close is over.
29
Setup (1/2) before T balance adjustment is started.
30
Setup (2/2) before T balance adjustment is started.
31
T balance adjustment started.
32
T balance adjustment (1/2).
33
T balance adjustment (2/2).
34
Waiting for spindle rotation to end.
Spindle rough servo.
35
Standing by after spindle rough servo is over.
36
RF AGC started.
37
RF AGC started.
38
RF AGC ending process in progress.
39
Tracking close in progress.
40
Standing by after tracking is closed.
Carriage closing in progress.
41
Focus/tracking AGC started.
42
Focus AGC started.
43
Focus AGC in progress.
44
Tracking AGC in progress.
45
Standing by after focus/tracking AGC are over.
46
Spindle processes applicable servo.
47
Check for servo close is started.
48
Check of LOCK pin started.
49
RF AGC started.
50
RF AGC in progress.
51
Standing by after RF AGC is over.
22
Protective action
None
None
None
None
None
None
None
None
None
None
None
Specified 10 seconds has been passed or failure
on home switch.
Specified 10 seconds has been passed or failure
on home switch.
None
None
None
None
None
Specified focus search time has been passed.
Specified focus search time has been passed.
None
None
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus or spindle not locked.
Off focus.
Off focus.
Off focus.