Pioneer DEH-P8400BH Manual do Proprietário - Página 11
Procurar online ou descarregar pdf Manual do Proprietário para Recetor Pioneer DEH-P8400BH. Pioneer DEH-P8400BH 39 páginas. Cd rds receiver
Imprimir página
Operating this unit
You can play the Pandora by connecting your
iPod which was installed the Pandora applica-
tion.
Basic operations
1 2
3
4
5
6
1 Thumbs Up/Thumbs Down indicator
2 QuickMix indicator
3 PLAY/PAUSE indicator
4 S.Rtrv indicator
Appears when Sound Retriever function is
on.
5 Song time (progress bar)
6 Play time indicator
Playing tracks
1 Connect an iPod to the USB cable using an
iPod Dock Connector.
2 Start up the Pandora application installed on
the iPod.
Giving a Thumbs Up
1 Press
to give a "Thumbs Up" for the
track currently playing.
Giving a Thumbs Down
1 Press
to give a "Thumbs Down" for the
track currently playing and to skip to the next
track.
Skipping tracks
1 Turn LEVER to the right.
Displaying text information
Selecting the desired text information
1 Press
/DISP.
Selecting and playing the
QuickMix/station list
1
Press
(list) to switch to the QuickMix/
station list mode.
2
Use M.C. to select the QuickMix or de-
sired station.
Changing the sort order
1 Press
(list).
! ABC – You can sort the items in the list alpha-
betically
! DATE – You can sort the items in the list in
order of the dates on which the items were
created
Changing QuickMix or stations
1 Turn M.C.
Playing
1 When QuickMix or the station is selected,
press M.C.
Function settings
1
Press M.C. to display the main menu.
2
Turn M.C. to change the menu option
and press to select FUNCTION.
3
Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Bookmark (bookmark)
1 Press M.C. to store track information.
Operating this unit
Pause (pause)
1 Press M.C. to pause or resume.
Sound Retriever (sound retriever)
1 Press M.C. to select the desired setting.
1—2—OFF (off)
OFF (off)—1—2 (MIXTRAX)
1 is effective for low compression rates, and 2
is effective for high compression rates.
Audio adjustments
1
1 Audio display
Shows the audio adjustment status.
1
Press M.C. to display the main menu.
2
Turn M.C. to change the menu option
and press to select AUDIO.
3
Turn M.C. to select the audio function.
After selecting, perform the following proce-
dures to set the audio function.
Fader/Balance (fader/balance adjustment)
1 Press M.C. to display the setting mode.
2 Press M.C. to cycle between fader (front/rear)
and balance (left/right).
3 Turn M.C. to adjust the front/rear speaker bal-
ance.
! The front/rear speaker balance cannot be
adjusted when the rear output setting is
Rear SP :S/W. Refer to S/W control (rear
output and subwoofer setting) on page 15.
4 Turn M.C. to adjust the left/right speaker bal-
ance.
Preset EQ (equalizer recall)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select an equalizer curve.
Powerful—Natural—Vocal—Custom1—Cus-
tom2—Flat—Super bass
G.EQ (equalizer adjustment)
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer curve
settings are stored in Custom1 or Custom2.
! A separate Custom1 curve can be created for
each source. If you make adjustments when a
curve other than Custom2 is selected, the
equalizer curve settings will be stored in Cus-
tom1.
! A Custom2 curve that is common for all sour-
ces can be created. If you make adjustments
when the Custom2 curve is selected, the Cus-
tom2 curve will be updated.
1 Recall the equalizer curve you want to adjust.
2 Press M.C. to display the setting mode.
3 Press M.C. to cycle between equalizer band
and level.
4 Turn M.C. to select the equalizer band to ad-
just.
100Hz—315Hz—1.25kHz—3.15kHz—8kHz
Turn M.C. to adjust the equalizer curve.
+6 to –6 is displayed as the equalizer curve is
increased or decreased.
Section
02
11
En