Pioneer VSX-C402 Instruções de funcionamento - Página 34

Procurar online ou descarregar pdf Instruções de funcionamento para Recetor Pioneer VSX-C402. Pioneer VSX-C402 46 páginas. Audio/video multi-channel receiver

Imprimir página

The System Setup menu

AV Direct setting

The AV Direct mode allows the receiver to pass audio/

video signals arriving at one of the AV connector inputs

to the other AV connector outputs without the sound

being routed to the speakers. (See also The AV Direct

mode on page 9.) In AV Direct mode, the current input is

shown (at reduced brightness) in the front panel display.

The AV Direct setting determines whether the receiver

switches to AV Direct mode automatically, or only when

you switch it manually.

• AVD MANU – Allows you to switch between standby

and AV Direct mode using the AV DIRECT button on

the remote control.

• AVD AUTO – Automatically switches to AV Direct

mode when an incoming signal is sensed by the

receiver in standby.

Auto input select setting

Specifies how the receiver responds when it senses that

a component connected to one of the SCART AV

connectors is switched on.

• SEL MANU – You must select the receiver's input

manually using the front panel INPUT SELECTOR, or

the input buttons on the remote control.

• SEL AUTO – When a component connected to one of

the SCART AV connectors (except the DVR/TV) is

switched on, the receiver automatically switches to

that input.

• When set to AVD AUTO, if a connected component

is switched on, you cannot switch this receiver into

standby (INPUT ON appears in the display).

• You can't use the sleep timer when the AV Direct

setting is AVD AUTO (see also Using the sleep timer

on page 30).

• AV Direct does not work when EON is on (see also

Enhanced Other Network (EON) on page 29).

SR+ control for Pioneer plasma displays

Make the following settings if you have connected a

Pioneer plasma display to this receiver using an SR+

cable. Note that the number of function settings available

will depend on the plasma display you've connected.

See also Using this receiver with a Pioneer plasma display

on page 16 and Using the SR+ mode with a Pioneer

plasma display on page 35.

Volume control setting

• VOL C OFF – The receiver does not control the

volume of the plasma display

• VOL C ON – When the receiver is switched to one of

the inputs that use the plasma display (DVD, or

another one of functions listed below), the volume on

the plasma display is muted so only sound from the

receiver is heard.

Function setting for DVD input

• DVD:1 – DVD:5 or TV – Matches the DVD function of

the receiver with a numbered video input on the

plasma display. For example, DVD:3 matches the

DVD input with video input 3 on the plasma display.

Function setting for STB input

• STB:1 – STB:5 or TV – Matches the STB function of

the receiver with a numbered video input on the

plasma display. For example, STB:1 matches the STB

input with video input 1 on the plasma display.

Function setting for DVR/TV input

• DVR:1 – DVR:5 or TV – Matches the DVR/TV

function of the receiver with a numbered video input

on the plasma display. For example, DVR:2 matches

the DVR/TV input with video input 2 on the plasma

display.

Function setting for VIDEO input

• VIDEO:1 – VIDEO:5 or TV – Matches the VIDEO

function of the receiver with a numbered video input

on the plasma display. For example, VIDEO:TV

matches the VIDEO input with TV on the plasma

display.

Function setting for FRONT input

• FRONT:1 – FRONT:5 or TV – Matches the

function of the receiver with a numbered video input

on the plasma display. For example, FRONT:4

FRONT

matches the

input with video input 4 on the

plasma display.

FRONT