Pioneer VSX-C502-S Instruções de funcionamento - Página 29

Procurar online ou descarregar pdf Instruções de funcionamento para Recetor Pioneer VSX-C502-S. Pioneer VSX-C502-S 49 páginas. Audio/video multi-channel receiver

Imprimir página

Home theater sound

Using the surround back channel

• Default setting: SB ON

You can have the receiver automatically switch to Dolby

Digital EX or DTS-ES decoding for 6.1 encoded sources

(SB AUTO), or you can choose to listen to other kinds of

sources (for example, 5.1 encoded material) with 6.1

encoding (SB ON). With 5.1 encoded sources, a surround

SB CH

Type of source

mode

Dolby Digital EX/DTS-ES

encoded multichannel

AUTO

source with 6.1ch

surround

Dolby Digital 5.1ch

source

AUTO

Dolby Digital/DTS

encoded multichannel

AUTO

source

Dolby Digital/DTS

encoded stereo source;

AUTO

other digital stereo

source

Analog 2-channel

(stereo) source

AUTO

* All modes except VIRTUAL mode

•

Press SBch MODE repeatedly to cycle through the

surround back channel options.

Each press changes the setting as follows:

• SB AUTO

• SB ON

• SB OFF

Note

• If the Surround back speaker setting is set to SB ––,

you can only use the virtual surround back effect (see

below).

• You can't hear the surround back channel with DTS

96 kHz/24-bit sources.

AUTO

SBch

MODE

back channel will be generated, but the material may

sound better in the 5.1 format for which it was originally

encoded, in which case you can simply switch the

surround back channel off (SB OFF).

The table below indicates when you will hear the

surround back channel when playing various kinds of

sources. (

=Sound plays through surround back

channel speaker.)

Surround

MOVIE, MUSIC,

NEO:6 CINEMA,

PROLOGIC

NEO:6 MUSIC

Listening with virtual surround back

speakers

• Default setting: VIR.SB OFF

If you don't have a real surround back speaker

connected, you can use the Virtual Surround Back

feature to simulate one.

Note that this feature only works when the surround

channels are active and the Surround back speaker

setting is set to SB ––. See also Surround-back speaker

setting on page 34.

•

Press SBch MODE repeatedly to switch between

VIR.SB ON and VIR.SB OFF.

Advanced

Surround*