Pioneer VSX-D507S Manual de Instruções - Página 22

Procurar online ou descarregar pdf Manual de Instruções para Recetor Pioneer VSX-D507S. Pioneer VSX-D507S 24 páginas. Audio/video multi-channel receiver
Também para Pioneer VSX-D507S: Manual de serviço (11 páginas), Manual de serviço (11 páginas), Manual de serviço (11 páginas), Manual de serviço (10 páginas)

Imprimir página

Turn

OFF

the power

the system

including

this unit.

Equipment

is will turn OFF

ac-

cording to the multi operation

settings.

Example:

When you are using the remote control unit for VCR aperation, and VCR/TAPE is

set to 4)" in the Multi Operation table on page 39, this unit, TV and VCR will turn

OFF by this operation.

vor

e In esis devices that have been turned OFF, turning OFF the system will turn

ON the power.

@ All the PIONEER products will turn OFF,

OOO)

@OOO®

QO @@'

(Co CS

SYSTEM OFF

nants

cera

"era

rnrnrenerennen

Canceling remote control settings

Cancels settings that have been set or learned.

All multi control buttons of the

remote

control

will blink. After

blinking three times, all settings

will be canceled.

Cancel the set and

learned settings.

AU VAD

Py +

While pressing the

COMMANDER

SET

UP button, press '0

for more than 3 sec-

onds .

Cancel the learned

Cancel the settings that have

settings.

yy"

B > been learned only.

While pressing the

eae

COMMANDER

SET

UP button, press'?

for more than 3 sec-

7 ~ COMMANDER

Ane.

SET UP

Seg

nec

Rotary

Reaper

ara

ocr

al orp

eine

| TROUBLESHOOTING

Symptom

Cause

Remedy

The power does not turn

@ The power plug is disconnected from the

ON.

outlet.

@ The cause may lie in the protection circuit.

@ Insert into the wall outlet.

® Disconnect the power plug from the out-

let, and insert again.

The

unit does

not work

even

when

the

buttons

are pressed.

@ Due to effects of static electricity when the

@ Disconnect the power plug from the out-

air is dry.

let, and insert again.

@ Refer to pages 12 to 14 and connect again.

@ Press the MUTING

button on the remote

control unit.

@ Adjust MASTER

VOLUME.

® Press the TAPE

2 MONITOR

button.

@ Press the SPEAKERS

button to select the

speakers.

@ Set the SPEAKERS button to match the set

of speakers connected.

@ The volume

is turned down.

@ The TAPE 2 MONITOR is ON.

@ The speaker switch is OFF.

® The SPEAKERS button has been used to se-

lected speakers A and B (SP »

AB), even

though only one set of speakers is connected.

@ Refer to pages

12 and 13, and connect

again.

@ The input source is not properly selected.

@ Press the correct button.

Considerable noise in ra-

@ Not received at proper frequency.

dio broadcasts

The antenna

is not connected.

@ Receive the correct frequency.

@ Connect the antenna properly. (P.12 and 13)

@ Stretch out the antenna

and secure

it to a

faces an inappropriate direction.

wall while selecting the direction and po-

sition with the best reception state.

@ Change the FM antenna to an outdoor an-

tenna of multiple elements. (P. 12}

Weak radio waves.

[AM broadcast reception]

@ The AM antenna faces inappropriate direc-

tion,

@ Weak radio waves.

@ Select the direction and position with the

best reception state.

@ Connect a 5 to 6 meter (15~18 feet) long

vinyl-coated wire to the AM antenna ter-

minal and extend the wire outdoors, if pos-

sible. (P. 12)

@ Turn off the equipment which cause noise

or move it away from the unit.

® Distance the antenna

from the equipment

which cause noise.

@ Affected by other equipment. (Fluorescent

lamp, motor, etc.)

Broadcast stations cannot

be selected automatically.

tenna of multiple elements. (P. 12)