Pioneer XV-DV353 Manual de Instruções - Página 25

Procurar online ou descarregar pdf Manual de Instruções para Recetor Pioneer XV-DV353. Pioneer XV-DV353 50 páginas. Dvd/cd receiver; speaker system
Também para Pioneer XV-DV353: Manual de Instruções (48 páginas)

Imprimir página

Surround sound settings

Chapter 6

Surround sound settings

Using the Setup menu

From the Setup menu you can access all the

surround sound settings of the system

including channel levels, speaker distances

and dynamic range adjustment. The Auto

MCACC feature (page 9) should give you the

best surround sound setup. However you may

find that by further adjustment of the surround

sound settings you can improve the surround

sound in your listening room.

Press SHIFT+SETUP and use

ENTER to choose the setting you want to

adjust.

The available settings are shown in the front

panel display.

Use

to adjust then press ENTER to

confirm and exit.

• Note that using the Auto MCACC (page 9)

again overwrites the speaker settings.

Channel level setting

Set the relative channel levels from your main

listening position.

Use

to switch between channels in the

following order:

• L – Front left speaker

• C – Center speaker

• R – Front right speaker

• SR – Surround right speaker

Note

1 There are other settings you can adjust from the Setup menu; these are explained in Improving poor FM reception on page 12

and Dimming the display on page 37.

2 The setup menu is exited automatically after 5 minutes of inactivity.

3 • You can't adjust center/surround when Stereo or Virtual playback is selected (or with stereo sources using the Auto mode).

• The Channel level setting is not available when headphones are connected.

• The speaker volume can be adjusted at any time by pressing SHIFT+TEST TONE and then using

levels. The test tone automatically moves from speaker to speaker in the order listed above. You should hear the test tone at the

same volume from each speaker when seated in the main listening position. Press ENTER when you're finished.

• Since the subwoofer produces ultra-low frequencies it may seem quieter than it actually is.

• SL – Surround left speaker

• SW – Subwoofer

The channel level range is ± 10 dB.

Speaker distance setting

Specifies the distance from your listening

position to your speakers.

When DISTANCE appears, press ENTER, then

use

to adjust the distance, and

switch between the following speakers:

• L – Front left speaker

• C – Center speaker

then

• R – Front right speaker

• SR – Surround right speaker

• SL – Surround left speaker

• SW – Subwoofer

Each speaker can be adjusted between 0.3 m

and 9.0 m. The default setting is 3.0 m.

Dynamic Range Control

Specifies dynamic range adjustment to Dolby

Digital or some DTS soundtracks. If low level

sound or dialog seem difficult to hear properly,

this can help by bringing up the low level

sounds, while controlling high level peaks.

• DRC OFF (default) – No dynamic range

adjustment (use when listening at higher

volumes)

• DRC MID – Mid setting

• DRC HIGH – Dynamic range is reduced

(loud sounds are reduced in volume while

quieter sounds are increased)

to adjust the channel