Pioneer VSX-5700S Manual de Instruções
Procurar online ou descarregar pdf Manual de Instruções para Recetor estéreo Pioneer VSX-5700S. Pioneer VSX-5700S 49 páginas.
AUDIO/VIDEO STEREO RECEIVER
Vorro/OO>
VSX-560O0
The functions of the both units, VSX-5600 and VSX-5700S are
identical.
* fiiustration shows VSX-5700S.
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will knaw how
to operate your model properly. After you have finished reading the
instructions, put them away in a safe place for future reference.
In some countries or regions, the shape of the power plug and power
outlet may sometimes
differ from that shown
in the explanatory
drawings. However, the method of connecting and operating the unit
is the same.
WARNING: 10 PREVENT FIRE OR SHOCK HAZARD, 00 NOT
EXPOSE THiS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
!2or U.S. and Canadian models]
on. serial number for this equipment is located on the rear panei. Please
ydrite this serial number on your enclosed warranty card and keep it in
a secure area. This is for your security.
Note to CATV system installer
This reminder is provided to call the CATV system installers attention
to Article
820-22
of the NEC that provides guidelines for procer
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding
system of the building, as close to the point
of cable entry as practi
{For Canadian model]
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS
(POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR
OTHER GUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
ATTENTION: pour PREVENIA LES CHOCS ELECTRIQUES NE
PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR
UNE PRISE OF COURANT OU UNE AUTRE SORTIE DE COURANT,
SAUF Si LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN
LAISSER AUCUNE PARTIE A DECOUVERT.
pa
| About the Demonstration Made
| *® The demonstration mode is activated by turning on the power
switch while holding down the ACOUSTIC MEMORY switch (from
power standby condition}. The demonstration will appear on the
display,
« Press any other switch to cancel the demonstration.
ae
}
|
RETURN function
This key returns the unit to a set of initial settings and ready to
broadcast tuner. This is helpful during troubleshooting or when no
| sound is output. For details, refer to page 19.
WY) PIONEER'
The future of sound and vision.