Pioneer VSX-604S Manual de Instruções - Página 4

Procurar online ou descarregar pdf Manual de Instruções para Recetor estéreo Pioneer VSX-604S. Pioneer VSX-604S 34 páginas.

Imprimir página
TWO VOLTAGE SELECTOR SWITCHES
(Not available on U.S. and Canadian models)
Only multi-voltage models are provided with these
switches.
U.S. and Canadian
models
are not
provided with these switches. Mains voltages in
Saudi Arabia are 127 V and 220 V only. Never use
this model with the 110 V setting in Saudi Arabia.
The line voltage selector switches are on the rear panel.
Before your model is shipped from the factory, these switches
are set to the power requirements of the destination. Check
that they are set properly before plugging the power cord
into the household wall socket. If the voltage is not properly
set or if you move to an area where the voltage requirements
differ, adjust the selector switches as follows.
1.Use a medium-size screwdriver.
2.First, insert the screwdriver in the groove of the voltage
selector at the right, and adjust so that the tip of the groove
points to the voltage value of your area.
3.Next, insert the screwdriver in the groove of the voltage
selector at the left and adjust until the voltage is the same
as at the right.
TWO VOLTAGE SELECTORS:
nov
.
oe
cS Va
nev
me
74
ve:
{
Medium-size screwdriver
4
<ARB7022>
BEFORE OPERATING , ADJUST THE POSITION OF THESE SWITCHES
CHANNEL STEP SWITCH
(Not available on U.S. and Canadian models)
The unit has been factory preset to the channel allocation
value for the area in which it is to be sold. If this value is set
incorrectly, the tuned in frequency may be wrong , or sound
may be distorted, resulting in an inability to reproduce
reception signals at their proper sound quality. For this reason,
be sure to confirm that the values are set correctly before
first using the unit.
(FM 100 kHz/AM 10 kHz) position:
Set to this position for areas with an FM reception step of
100 kHz and AM 10 kHz.
(FM 50 kHz/AM 9 kHz) position:
Set to this position, for areas with an FM reception step of
50 kHz and AM 9 kHz.
NOTE:
When unsure about the channel allocation for your area, consult your
dealer for correct information.
QkHz
SOkHz
Eze
2
CHANNEL STEP
ie 4 OkHz 100kHz
r