Pioneer VSX-605S Manual de Instruções - Página 13

Procurar online ou descarregar pdf Manual de Instruções para Recetor estéreo Pioneer VSX-605S. Pioneer VSX-605S 37 páginas. Audio/video stereo receiver
Também para Pioneer VSX-605S: Manual de Instruções (37 páginas)

Imprimir página

@ CENTER PRE OUT jack

When a separate power amplifier is used to drive the surround

center speaker, connect the power amplifier to this jack.

TWO VOLTAGE SELECTORS switches

(Muiti-voltage model only)

See page 4.

(9: PHONO input jacks

Connect to the output cables from a turntable.

@ GND terminal

Connect the turntable ground lead to this terminal.

NOTE:

This is used to decrease noise and does not serve as a complete

ground.

4) TAPE 2 MONITOR jacks

Connect to audio components such as a second cassette deck or

a graphic equalizer.

a CD input jacks

Connect to the output jacks of a compact disc player.

43 LD/DVD input jacks

Connect to an LD player's output jacks (audio, video) or a DVD

player's output jacks (audio, video).

(4 VCR/TAPE 1 jacks

Connect to a VCR or the first cassette deck. With a VCR, also

connect the video jacks.

49 CHANNEL STEP switch

(Multi-voltage modei only)

See page 4.

16 SUB WOOFER PRE OUT jack

if you want to boost the low frequencies, connect to a subwoofer

power ampiifier.

a CENTER SPEAKER terminais

Connect the center speaker to these terminals.

NOTE:

Do not allow any of the cord's conductors to protrude from the

terminals or touch any other conductors.

Malfunctions or

breakdowns may occur when conductors come into contact with

each other. Use a center speaker with an impedance of 8Q to 16

REAR PANEL FACILITIES

a& REAR SPEAKERS terminalis

Connect the rear speakers te these terminals.

NOTES:

@ Do not aliow any of the card's conductors to pratrude from

the terminals or touch any other conductors. Malfunctions or

breakdowns may oceur when conductors come into contact

with each other. Use rear speakers with an impedance of 82

to 16.

® Be sure to connect two speakers (L, R). There will be no sound

if only one speaker is connected.

42 FRONT SPEAKERS terminals

:Connect to the first set of speakers.

;Connect to the second set of speakers.

NOTE:

Do not allow any of the cord's conductors to protrude from the

terminals

or touch

any other conductors.

Malfunctions

breakdowns may occur when conductors come into contact with

each other. Use front speakers with an impedance of 8Q to 16Q.

@ Power cord

@ AC OUTLET

(Multi-voltage, U.S. and Canadian models only}

{U.S. and Canadian models)

[SWITCHED 100 W (0.8 A) MAX]

Power supplied through this outlet is turned on and off by the

receiver's POWER switch. Total electrical power consumption of

connected equipment should not exceed 100 W (0.8 A).

{Multi-voltage model)

[SWITCHED 100 W MAX]

Power supplied through this outlet is turned on and off by the

receiver's POWER switch. Total electrical power consumption of

connected equipment should not exceed 100 W.

NOTES:

® This unit shouid be disconnected by removing the power plug

from the walf socket when not in regular use, e.g. when on

vacation.

®@ Do not connect appliances with high power consumption such

as heaters, irons, or television sets to this AC OUTLET in order

to avoid overheating and fire risk. This can cause the receiver

to malfunction,

CAUTION:

BO NO CONNECT MONITOR OR TV SET.