Pioneer VSX-9700S Manual de Instruções - Página 22

Procurar online ou descarregar pdf Manual de Instruções para Recetor estéreo Pioneer VSX-9700S. Pioneer VSX-9700S 48 páginas.

Imprimir página
REAR PANEL FACILITIES
TO MONITOR TV jacks (OUTPUT)
Use to connect a monitor TV or a TV set with video input terminals for
watching program materials from a VCR or Video disc player (CDV
player) connected to this unit.
If monitor with S-VHS input connector is used, you also need line out
to video monitor.
@ AC OUTLETS
(U.S. and Canadian models]
SWITCHED TOTAL 200 W MAX
Power supplied through these outlets is turned on and off by the
receiver's POWER
switch.
Total electrical power
consumption
of
connected equipment should not exceed 200 W.
UNSWITCHED
200 W MAX
Power flows continually to this outlet, regardless of whether the receiver
is switched ON or OFF. Electrical power consumption of the connected
equipment should not exceed 200 W.
[Multi-voltage model]
SWITCHED TOTAL 100 W MAX
Power supplied through these outlets is turned on and off by the
receiver's POWER
switch.
Total electrical power consumption
of
connected equipment should not exceed 100 W.
UNSWITCHED 100 W MAX
Power flows continually to this outlet, regardless of whether the receiver
is switched ON or OFF. Electrical power consumption of the connected
equipment should not exceed 100 W.
NOTE:
© This unit should be disconnected by removing the power plug from
the wail socket when not in regular use, e.g. when on vacation.
* Do not connect appliances with high power consumption such as
heaters, irons, or television sets to these AC OUTLETS in order to
avoid overheating and fire risk.
This can cause the receiver to malfunction.
@2 Audio INPUT jacks
PHONO....... Connect to turntable.
CD: esa
eeces Connect to compact disc player.
LINE ........... Connect to the audio output jacks of an additional audio
component.
@3 TAPE 1/DAT jacks
Connect a DAT (digital audio tape deck) or your primary analog cassette
deck to these jacks.
Connection for Recording
The tape recording jack (TAPE REC) on the cassette deck or DAT should
be connected to the REC side of the TAPE 1/DAT jack on the receiver
with a pin plug connecting cord.
Connection for Playback
Connect the TAPE PLAY jack on the cassette deck or DAT to the PLAY
side of the TAPE 1/DAT jack on the receiver with a pin plug connecting
cord.
TAPE 2 jacks
Connect a second cassette deck to these jacks.
Connection for Recording
The tape recording jack (TAPE REC) on the cassette deck should be
connected to the REC side of the TAPE 2 jack on the receiver with a
pin plug connecting cord.
Connection for Playback
Connect the TAPE PLAY jack on the cassette deck to the PLAY side
of the TAPE 2 jack on the receiver with a pin plug connecting cord.
22
<ARB1234>
@) VIDEO jacks (input)
Connect the output jacks of video components.
For example, connect a playback-only VCR or a video camera.
@® TV jacks (input)
Use these jacks if wish to connect a TV tuner having both video and
audio outputs.
[VIDEO IN]
Connect the TV tuner's VIDEO OUTPUT to this jack.
[AUDIO IN ({L, R)]
Connect the TV tuner's AUDIO OUTPUT to these jacks.
@ VDP/CDV jacks (INPUT)
[VIDEO IN]
When watching the video image from a LD player (VDP/CDV player)
{or a VCR used for playback), connect its VIDEO OUTPUT jack here.
[AUDIO IN (L,R)]
When playing back the audio channel from a LD player (VDP/CDV
player) or a VCR for playback, connect its AUDIO OUTPUT jacks here.
VCR 1 jacks
[VIDEO IN]
To receive the video image from VCR 1 used for playing, connect its
VIDEO OUTPUT jack here.
[AUDIO IN (L, R)]
To receive the audio channels from VCR 1 used for playing, connect
its AUDIO OUTPUT jacks here.
[VIDEO OUT)
When copying program material from the video component connected
to the VCR 2, VCR 3, VIDEO, VDP/CDV or TV jacks, connect to the
VIDEO INPUT jack of the VCR 1 used for recording.
[AUDIO OUT (L, R)]
'
:
When copying program material from the video component connected
to the VCR 2, VCR 3, VIDEO, VDP/CDV or TV jacks, or when recording
music from an audio component source, connect to the AUDIO INPUT
jacks of the VCR 1 used for recording.
VCR 2 jacks
[VIDEO IN]
To receive the video image fromm VCR 2 used for playing, connect its
VIDEO OUTPUT jack here.
[AUDIO IN (L, R)]
To receive the audio channels from VCR 2 used for playing, connect
its AUDIO OUTPUT jacks here.
[VIDEO OUT]
When copying program materials from the video component connected
to the VCR 1, VCR 3, VIDEO, VDP/CDV or TV jack, connect to the
VIDEO INPUT jack of the VCR 2 used for recording.
[AUDIO OUT (L, R)]
When copying program materials from the video component connected
to the VCR 1, VCR 3, VIDEO, VDP/CDV or TV jacks, or when recording
music from an audio component source, connect to the AUDIO INPUT
jacks of the VCR 2 used for recording.
VCR 3 input jacks
[VIDEO IN]
To receive the video image from a VCR used for playing only, connect
its VIDEO OUTPUT jacks here.
{AUDIO IN (L, R)J
To receive the audio channels from a VCR used for playing, connect
its AUDIO OUTPUT jacks here.