Pioneer VSX-D411 Manual de Instruções - Página 32

Procurar online ou descarregar pdf Manual de Instruções para Recetor estéreo Pioneer VSX-D411. Pioneer VSX-D411 44 páginas. Audio/video multi-channel receiver
Também para Pioneer VSX-D411: Manual de serviço (4 páginas)

Imprimir página

Setting up the receiver

When S is selected in the speaker setting,

the surround distance cannot be set.

Dynamic range control setting

• Default setting: OFF

Dynamic range is the difference between the

loudest and softest sounds in any given signal.

With this setting, you can compress the

dynamic range, so that low level sounds can be

heard more easily (sounding relatively louder)

yet louder sounds won't be too overbearing.

Press ' or ' to set the dynamic range

•

control (OFF, MAX, or MID).

• When listening at low volumes, set to

MAX for maximum dynamic range

compression.

• Dynamic range control is effective only

when a Dolby Digital signal is being played

back.

Dual mono setting

• Default setting: ch1

The dual mono setting can only be used when

listening to Dolby Digital discs with dual mono

encoding. These discs are not widely used, but

are sometimes used when it is necessary to

have one language on one channel and a

different language on the other. With this

setting you can choose which channel in the

dual mono setting you want to listen to.

If Dolby Digital mode is switched on, you will

hear the channel you have selected (either ch1

or ch2) through your center speaker. With Dolby

Digital mode off, or if you don't have a center

speaker, you will hear the channel you have

selected through both front speakers. In the L

ch 1. R ch 2 setting, the left front speaker will

play channel 1 and the right front speaker will

play channel 2.

Use ' or ' to cycle through the

•

possible DUAL MONO settings.

L ch 1.R ch 2

ch2

Coaxial digital input setting

• Default setting: DVD

Here you tell the receiver what component you

have hooked up to the coaxial digital input jack.

Use ' or ' to select the coaxial digital

•

input (DVD, TV, CD, CD-R, VCR or OFF).

After you assign a component to the digital

jack, whenever you select that component, for

example a DVD player, the receiver automati-

cally changes to the digital input setting and

DIGITAL shows in the display.

Optical digital input setting

• Default setting: TV

Here you tell the receiver what component you

have hooked up to the optical input jack.

Use ' or ' to select the optical digital

•

input (DVD, TV, CD, CD-R, VCR, or OFF).

After you assign a component to the digital

jack, whenever you select that component, for

example a DVD player, the receiver automati-

cally changes to the digital input setting and

DIGITAL shows in the display.

ch1