Pioneer VSX-D7025 Manual de Instruções - Página 27

Procurar online ou descarregar pdf Manual de Instruções para Recetor estéreo Pioneer VSX-D7025. Pioneer VSX-D7025 44 páginas.

Imprimir página

DOLBY PRO LOGIC SURROUND, PRO LOGIC THEATER AND DOLBY

3CH LOGIC

Use with video or audio software bearing the Die

mark.

Use DOLBY PRO LOGIC SURROUND or PRO LOGIC THEATER when

rear speakers are connected,

and DOLBY

3CH

LOGIC

when

rear

speakers are not connected.

For correct surround

reproduction,

be sure to perform following

adjustments.

LEVEL ADJUSTMENT

1. Use SURROUND

MODE buttons to select DOLBY

PRO LOGIC

SURROUND

or PRO LOGIC THEATER

or switch DOLBY

3CH

LOGIC ON with the DOLBY 3CH LOGIC button.

. Use SPEAKERS button to turn on front speakers.

. Adjust MASTER VOLUME to a suitable listening level.

. Press BALANCE L and R buttons together.

. Select the CENTER MODE (NORMAL, WIDE, PHANTOM) setting

with the remote control CENTER MODE button.

a & WN

6. Press the remote control TEST TONE button.

7. With the remote control BALANCE (L, R), CENTER LEVEL (+, -),

REAR BALANCE (L.R) and REAR LEVEL (+, ~) buttons, adjust the

test tone volume level so that it is the same from each speaker.

8. Press the remote control TEST TONE button to switch the test tone

OFF.

NOTE:

¢ The TEST TONE turns off if you operate the INPUT SELECTOR.

are not possible during DOLBY 3CH LOGIC operation.

OPERATION

. Select the DOLBY PRO LOGIC SURROUND, PRO LOGIC THEATER

or DOLBY 3CH LOGIC.

. Select the component for playback with the INPUT SELECTOR

buttons.

. Select the center mode with the remote control CENTER MODE

button.

. Begin playback.

. Adjust volume level with the MASTER VOLUME control.

SETTING THE DELAY TIME

When using DOLBY PRO LOGIC SURROUND, you can set the delay

time between 16 ms and 30 ms (2 ms step). The standard setting is

20 ms, but you can select any setting of your choice.

When you press the DELAY TIME button on the main unit or remote

control, DELAY lights in the display section, with numerical indication

of the delay time.

SETTING THE EFFECT LEVEL

When using PRO LOGIC THEATER,

adjust the total effect to your

desired level with the DSP EFFECT buttons or EFFECT LEVEL buttons

of the remote control unit.

¢ A numerical display from 10 to 100 of the effect level is shown in

the display section.

SIMULATED SURROUND, DANCE, HALL, THEATER, JAZZ, CHURCH

This unit is equipped with DSP that provides different SFC surround

modes. You can control the level of the surround effect with the DSP

EFFECT buttons.

LEVEL ADJUSTMENT

1. Press the remote control TEST TONE button to switch the test tone

ON.

2. Adjust so that the volume level is the same from each of the

speakers.

¢ Adjust front speaker balance with the receiver balance buttons.

¢ For the rear speakers, set the remote control Level/Balance select

switch to the desired position, and adjust the balance with the

L, R buttons, and the level with the +, — buttons.

3. Press the remote control TEST TONE button to switch the test tone

OFF.

SETTING THE EFFECT LEVEL

1. Select one of the SURROUND MODE buttons.

* The selected surround mode indicator lights in the display section.

2. Adjust the total effect to your desired level with the DSP EFFECT

buttons or EFFECT LEVEL buttons of the remote control.

¢ Anumerical display from 10 to 100 of the effect level is shown

in the display section.