Pioneer CT-F10 Instruções de serviço complementares - Página 5

Procurar online ou descarregar pdf Instruções de serviço complementares para Amplificador Pioneer CT-F10. Pioneer CT-F10 21 páginas. Stereo cassette deck
Também para Pioneer CT-F10: Manual de Instruções (40 páginas), Manual de serviço (28 páginas), Manual de serviço (28 páginas)

Imprimir página

Pioneer CT-F10 Instruções de serviço complementares

3 If you plan to use the cassette

deck on a table-top or shelf,

attach Stand B.

Line up the tab on Stand B with the center

hole on Stand A and slot it into place. Stand B

will slide under the two tabs on the back of

Stand A.

If you are going to wall-mount the unit, see

Wall-mounting your system of the main

Operating Instructions.

Stand B

Stand A

Important

Pioneer bears no responsibility for accidents

resulting from faulty assembly or installa-

tion, insufficient mounting strength of walls

or other building fixtures, misuse or natural

disasters.

Ribbon cables

IMPORTANT: Never connect or disconnect the

system ribbon cables while the power plug is

connected to the wall outlet. Doing so may

damage the unit.

To insert, hold the

connector and push firmly

into the socket until you

hear it click home.

To remove, hold the

connector securely on

either side with thumb and

forefinger and pull out

from the socket.

• To remove Stand B, push the center tab, as

indicated, and slide off.

PUSH

• To remove Stand A, pull the tab, as indicated,

and slide off.

PULL

Specifications

Stereo Cassette Deck: CT-F10

System ........................... 4-track, 2-channel stereo

Heads ......................... Recording/playback head x 1

Motor ...................................... DC Servo motor x 1

Frequency Response (–20dB recording)

Type I (Normal) tape ................. 20 Hz–16,000 Hz ± 6 dB

Type II (High/CrO2) tape .......... 20 Hz–16,000 Hz ± 6 dB

Signal-to-Noise Ratio ................................... 56 dB

(EIAJ, peak recording level, audio compensation)

Noise Reduction Effect

Dolby B-type NR ON .... More than 10 dB (at 5 kHz)

Wow and Flutter .... 0.07% (WRMS),

Dimensions (with out Stands)

............................. 170 (W) x 268 (H) x 66 (D) mm

Weight ......................................................... 1.5 kg

Accessories

Stand A ................................................................ 1

Stand B ................................................................ 1

Operating instructions ......................................... 1

Warranty card ....................................................... 1

Note: Specifications and design subject to possible

modification without notice, due to improvements.

Published by Pioneer Corporation.

Erase head x 1

0.14% (DIN)