Pioneer GM-D8400M - Amplifier Manual do Proprietário - Página 11
Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Pioneer GM-D8400M - Amplifier. Pioneer GM-D8400M - Amplifier 16 páginas. Class d mono amplifier
Também para Pioneer GM-D8400M - Amplifier: Manual do Proprietário (6 páginas), Manual do Proprietário (38 páginas), Manual de serviço (32 páginas)
Imprimir página
Installation
A
CAUTION
• Do not install in:
-Places where it could injure the driver or pas-
senoers if the vehicle stops suddenly.
b
.
-Places where it may interfere with the dnver,
such as on the floor in front of the driver's
seat.
• Make sure that wires are not caught in the sliding
mechanism of the seats, resulting in a short-cir-
cuit.
• Confirm that no parts are behind the panel when
drilling a hole for installation of the amplifier.
Protect all cables and important equipment such
as fuel lines, brake lines and electrical wiring
from damage.
• Install tapping screws in such a way that the
screw tip does not touch any wire. This is impor-
tant to prevent wires from being cut by vibration
of the car, which can result in fire.
• DO NOT allow amplifier to come into contact
with liquids due to, for example, the location
where the amplifier is installed. Electrical shock
could result. Also, amplifier and speaker damage,
smoke, and overheating could result from contact
with liquids. In addition, the amplifier surface
and the surface of any attached speakers could
become hot to the touch and minor bums could
result.
• To ensure proper installation, use the supplied
parts in the manner specified. If any parts other
than the supplied ones are used, they may damage
internal parts of the amplifier, or they may
become loose causing the amplifier to shut down.
• Never replace the fuse with one of greater value
or rating than the original fuse. Use of an improp-
er fuse could result in overheating and smoke and
could cause damage to the product and injury
including bums.
A
CAUTION:
To prevent malfunction and/or injury
• To ensure proper heat dissipation of the amplifier,
be sure of the following during installation.
-Allow adequate space above the amplifier for
proper ventilation.
-Do not cover the amplifier with a floor mat
or carpet.
• DO NOT allow amplifier to come into contact
with liquids due to, for example, the location
where the amplifier is installed. Electrical shock
could result. Also, amplifier and speaker damage,
smoke, and overheating could result from contact
with liquids. In addition, the amplifier surface
and the surface of any attached speakers could
become hot to the touch and minor bums could
result.
• Do not install the amplifier on unstable places
I
i
d
such as the spare tire boar .
i •
The best location for installation differs with the
II
car model and installation location. Secure the
amplifier at a sufficiently rigid location.
• Make temporary connections first and check that
!
the amplifier and the system operate properly.
II
h
After installing the amplifier, confirm that t e
I
spare tire, jack and tools can be easily removed.
I