Pioneer VSA-700 Manual - Página 15

Procurar online ou descarregar pdf Manual para Amplificador Pioneer VSA-700. Pioneer VSA-700 30 páginas. Av digital surround amplifier

Imprimir página

CONNECTIONS

CONNECTING

SPEAKER WIRES

Example:

For the lower-row speaker terminals.

Strip off the vinyl covering and twist the strands together.

10 ow

Raise the lever in the direction of the arrow and insert the

exposed conductor into the hole.

Return the lever to its original position to secure the cord.

L ®

NOTE:

Do not allow any of the cord's conductors to protrude

from the terminals or touch any other conductors.

Malfunctioning

.or breakdowns

may

occur

when

conductors come into contact with each other.

REMOTE CONTROL CORD CONNECTIONS

The connections shown below are performed when using the

VSA-700 remote sensor.

By interconnecting the CONTROL jacks of Pioneer units with

the

mark, the entire system can be operated with this

remote control unit, although some of the units (AM/FM

tuner, turntable, cassette deck, etc.) may not be equipped

with remote sensors. The entire system can be operated by

a remote

control

unit

connecting

PIONEER

stereo

components

to each

other

using

the

control

input

(CONTROL IN) jack on each component. Use the remote

control cord supplied

with the respective unit for the

connection. An example is shown in the drawing below. As

long as you connect

'"'OUT"" to "IN", the connecting

sequence is arbitrary. In the case of a unit which has only

an "IN" connector, however, connect it last.

CONNECTING

INPUT/OUTPUT CORDS

Connect white plugs to the L (left) side, and red plugs to the

R (right) side. Be sure to push the plugs in securely.

Left channel

Right channel —@

—

Gye

Red plug

White plug

Component display

VSA-700

Remote control unit