Pioneer CDJ-800MK2 Manual de Instruções - Página 14

Procurar online ou descarregar pdf Manual de Instruções para Leitor de CD Pioneer CDJ-800MK2. Pioneer CDJ-800MK2 24 páginas. Compact disc player
Também para Pioneer CDJ-800MK2: Manual de serviço (4 páginas)

Imprimir página

DJ Player Operation

CUE/LOOP CALL

TIME MODE/

AUTO CUE

FOLDER

|, \

TRACK

4, ¢

1, ¡

CUE

PLAY/PAUSE

Jog dial

Auto cueing

This function automatically sets the cue point ( P. 15) just before actual

sound begins when a disc is loaded, or when performing track search or

changing tracks.

If the search continues for ten seconds without finding the point, the

cue point is set at the track's beginning.

¶ Turning auto cueing on and off

Pressing the TIME MODE/AUTO CUE button and holding it down

for a second or more causes auto cueing to be alternately turned on

and off.

When AUTO CUE is on, the [A.CUE] indicator will be lit up.

¶ AUTO CUE on/off status is stored in memory and persists even

when the power is turned off.

¶ It can change the AUTO CUE level.

7 Changing the AUTO CUE level

1. Press the TIME MODE/AUTO CUE button for over 5 seconds.

¶ The display will indicate [–60db] (in the original state).

2. Press the CUE LOOP CALL button (2, 3) to change the level.

¶ It can choose from –36 dB, –42 dB, –48 dB, –54 dB, –60 dB, –66 dB,

–72 dB and –78 dB.

¶ When the TIME MODE/AUTO CUE button is pressed or 15 sec-

onds elapses, the level change mode is canceled.

¶ Even if you turn the power off, the set level will remain in memory.

Starting playback

1. Insert a disc in the player.

This unit spins discs at high speeds to provide high performance. As

a result, disc loading takes a couple of seconds.

2. If auto cueing is on, press the PLAY/PAUSE button (6).

¶ Press the PLAY/PAUSE button only after the current time lights

in the display. The silent portion at the beginning of the displayed

track will be skipped and playback will begin instantaneously from

the first bars of the track.

When one track's playback ends, the next track is cued. The [CUE]

indicator lights, and the PLAY/PAUSE button [6] indicator flashes

to indicate the unit is in the play standby mode.

When the PLAY/PAUSE button (6) is pressed, the next track be-

gins its playback.

If auto cueing is off, playback will begin automatically from

the first track.

¶ When auto cueing is off, playback will continue after the first track

has been played, with all subsequent tracks being played in sequence.

¶ When playback of the final track is complete, playback will automati-

cally come to an end.

To stop playback

EJECT

1. Press the EJECT button (0).

¶ Playback will stop and the disc will be ejected.

¶ Note that the CDJ-800MK2 does not come with a stop button.

Resume function

¶ Even if the EJECT button is pressed by mistake, if the PLAY/PAUSE

button is pressed quickly (before the [EJECT] indicator lights in the

display), the unit will revert to the status it was in before the EJECT

button was pressed. However, the audio output will stop during that

time.

¶ Following disc eject, if the same disc is reinserted, the unit will return

to the same status it was in before the disc was ejected (with excep-

tion of loop).

¶ Following disc eject, if the FOLDER SEARCH button (|, \) or TRACK

SEARCH button (4, ¢) is pressed, the resume function will be

canceled.

To pause playback

During playback, press the PLAY/PAUSE button (6).

¶ The PLAY/PAUSE button [6] indicator and [CUE] indicator will flash,

and playback will be interrupted.

¶ If the PLAY/PAUSE button is pressed again, the button's indicator

will light and playback will resume.

¶ In CDJ mode, broken playback sound will be output even during pause.

If you wish for no sound to be output, lower the output level of the

audio mixer.

¶ In VINYL mode, playback may decelerate slowly before coming to a

full stop ( P. 18, "Braking")

¶ After setting the unit to pause, if no subsequent operation is per-

formed for 100 minutes, the disc rotation will automatically stop. In

this event, pressing the PLAY/PAUSE button will cause playback to

resume.

¶ If the [END] display is left on for 100 minutes without further player

operations, the unit will stop, even if it is in the play mode.

Fast forward / Fast reverse

Press one of the SEARCH buttons (1, ¡) during playback.

Press and hold the ¡ button for fast forward the disc; press and hold

the 1 button for fast reverse.

¶ When playing MP3, fast forward/fast reverse are supported only for

tracks inside the same folder.

¶ When playing MP3 files recorded in VBR format, fast forward and

fast reverse speed will be slower.

7 Super-fast search

Rotate the jog dial while pressing one of the SEARCH but-

tons (1, ¡).

¶ Hold down one of the SEARCH buttons (1, ¡) while turning the

jog dial in the desired direction to enter super-fast forward or super-

fast reverse mode.

¶ When playing MP3 files recorded in VBR format, super-fast search is

not supported; fast forward and fast reverse are performed at ordi-

nary speed.

¶ During super-fast search, the search direction is determined by the

direction the jog dial is turned. The direction of the pressed SEARCH

button (1, ¡) is ignored.

¶ When the jog dial rotation stops, the unit returns to playback mode.

¶ When the SEARCH button (1, ¡) is released, super-fast search is

canceled.

¶ In the case of CDs, fast forward and reverse are performed in propor-

tion to speed at which the jog dial is rotated.

¶ When playing MP3, fast forward/fast reverse is supported only tracks

inside the same folder.