Pioneer PD-M602/KUXJ Manual de serviço - Página 25

Procurar online ou descarregar pdf Manual de serviço para Leitor de CD Pioneer PD-M602/KUXJ. Pioneer PD-M602/KUXJ 33 páginas. Multi-play compact disc player

Imprimir página
ed B10) € 7
3. Pickup Radial/Tangential Tilt Adjustment
@ Objective
To adjust the angle of the pickup relative to the disc so that the laser beams are shone straight
down into the disc for the best read out of the RF signals.
@ Symptom when out of | Sound broken;some discs can be played but not others.
adjustment
@Measurementinstru-
| Connect the oscilloscope to
@ Player state
Test mode, play
ment connections
TPI, Pin 1 (RF).
;
or
@Adjustment location
| Pickup radial tilt adjustment screw
[Settings]
20 mV/division
and tangential tilt adjustment screw
200 ns/division
AC mode
YEDS-7
[Procedure]
1.
32
Press the TRACK / MANUAL SEARCH FWD D> - Pl or REVKK - <ki key to move the pickup to halfway across
the disc (R=35mm).
Press the PGM (PROGRAM) key, the PLAY [> key, then the PAUSE []l] key in that order to close the respective
servos and put the player into play mode.
. First, adjust the radial tilt adjustment screw with a Phillips screwdriver so that the eye pattern (the diamond shape at
the center of the RF signal) can be seen the most clearly.
.
. Next, adjust the tangential tilt adjustment screw with a Phillips screwdriver so that the eye pattern (the diamond shape
at the center of the RF signal) can be seen the most clearly (Figure 3).
. Adjust the radial tilt adjustment screw and the tangential tilt adjustment screw again so that the eye pattern can be
seen the most clearly. As necessary, adjust the two screws alternately so that the eye pattern can be seen the most
clearly.
. When the adjustment is completed, lock the radial and tangential adjustment screw.
Note:Radial and tangential mean the directions relative to the disc shown in Figure 2.
Phillips
screwdriver
Tangential
direction
Radial direction
Tangential direction
eo
()
Disc
Figure 2
Radial direction
Adjustment locations