Pioneer PDR-509 Manual de Instruções - Página 23

Procurar online ou descarregar pdf Manual de Instruções para Leitor de CD Pioneer PDR-509. Pioneer PDR-509 40 páginas. Compact disc recorder
Também para Pioneer PDR-509: Esquemas de serviço (23 páginas), Manual de serviço (48 páginas), Manual de serviço (23 páginas), Manual de serviço (14 páginas)

Imprimir página
Pioneer PDR-509 Manual de Instruções

Manually Recording a Digital Source

If you are recording from a digital source other than
not possible since there are no track numbers or start
sources, use the manual recording method described here.
1 3
DIGITAL
ANALOG
REC LEVEL
REC LEVEL
REPEAT
7
5
2
◊ÛB - .?/
INPUT
MONITOR
TIME
SELECTOR
3
Î
FADER
FINALIZE
REC
DIGITAL
AUTO/
TRACK NO.
ERASE
SYNCHRO
MANUAL
WRITE
7
8
3
7
TIME
1
¡
4
¢
INPUT
SKIP
SKIP ID
SELECTOR
PLAY
SET
CLEAR
1
2
3
4
5
6
7
8
2
,
,
CD
MD
s to signal the start and end points of the recording. For these
ID
1
Load a CD–R or CD–RW disc.
Check the display to make sure that there's enough space on the disc
for what you want to record.
2
Press INPUT SELECTOR to choose one of the
digital inputs.
Pressing
ANA (Analog) - OPT (Optical) - COA (Coaxial)
The recorder's display indicates the current input.
3
Press RECORD ¶ ( ¶ REC on the remote control).
The recorder goes into record-pause mode.
4
Start playing the source to check it's recordable.
If the recorder does not recognize the digital format, or the source is
copy-protected using
appears. In either case, you won't be able to record digitally—use the
analog inputs instead (see Recording an Analog Source on page 25).
If necessary, set the recording level (see the following page).
If the signal appears
5
Check that the time display reads 00:00, then press
8 (pause) or 3 (play) to start recording.
5
6
Restart playback of the source material.
If the
AUTO TRACK
a new track each time it detects a signal after at least two seconds of
continuous silence. (To switch off auto track numbering see page 30.)
7
When you're done, press 7 (stop).
After pressing 7 (stop), the display shows
the track information to the disc.
Basic Playback and Recording
or
—digital satellite, for example — synchro recording is
DCC
DAT
repeatedly switches the active input:
INPUT SELECTOR
, the message
SCMS
, stop the source.
OK
indicator is lit in the display then the recorder will start
or
CAN NOT REC
CAN NOT COPY
while it records
PMA REC
23