Pioneer Super Tuner IIID DEH-P5800MP Manual de operação - Página 29
Procurar online ou descarregar pdf Manual de operação para Leitor de CD Pioneer Super Tuner IIID DEH-P5800MP. Pioneer Super Tuner IIID DEH-P5800MP 38 páginas. Owner's manual
Também para Pioneer Super Tuner IIID DEH-P5800MP: Manual de instalação (6 páginas), Manual do Proprietário (34 páginas)
Imprimir página
Audio Adjustments
Adjusting nonfading output level
When the nonfading output is on, you can adjust the level of nonfading output.
1. Press AUDIO to select nonfading output setting.
Press AUDIO until NOFAD: 0 appears in the display.
2. Press 8 or 2 to adjust the nonfading output level.
Each press of 8 or 2 increases or decreases the level of the nonfading output.
+6 – –6 is displayed as the level is increased or decreased.
Using the high pass filter
When you do not want low sounds from the subwoofer output frequency range to play
from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies
higher than those in the selected range are outputted from the front or rear speakers.
1. Press AUDIO to select HPF.
Press AUDIO until HPF appears in the display.
2. Press 8 to turn high pass filter on.
HPF: 80 appears in the display. High pass filter is now on.
• If the high pass filter has been previously adjusted, the frequency of that previously
selected will be displayed instead of HPF: 80.
• To turn high pass filter off, press 2.
3. Press 4 or 6 to select cut-off frequency.
Each press of 4 or 6 selects cut-off frequencies in the following order:
50 – 80 – 125 (Hz)
Only frequencies higher than those in the selected range are outputted from the front
or rear speakers.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of each source to
prevent radical changes in volume when switching between sources.
• Settings are based on the FM tuner volume level, which remains unchanged.
1. Compare the FM tuner volume level with the level of the source you wish to
adjust.
2. Press AUDIO to select SLA.
Press AUDIO until SLA appears in the display.
3. Press 8 or 2 to adjust the source volume.
Each press of 8 or 2 increases or decreases the source volume.
SLA : +4 – SLA : –4 is displayed as the source volume is increased or decreased.
Notes
• Since the FM tuner volume is the control, it is not possible to apply source level adjustments
to the FM tuner.
• The MW/LW tuner volume level can also be adjusted with source level adjustments.
• The built-in CD player and the multi-CD player are set to the same source level adjustment
volume automatically.
• External unit 1 and external unit 2 are set to the same source level adjustment volume
automatically.
29