Pioneer DV-290-K Manual de Instruções - Página 12
Procurar online ou descarregar pdf Manual de Instruções para Leitor de DVD Pioneer DV-290-K. Pioneer DV-290-K 48 páginas. Pioneer operating instruction dvd player dv-393-s dv-490v-s
Também para Pioneer DV-290-K: Manual de Instruções (48 páginas), Manual de Instruções (48 páginas)
Imprimir página
02
Connecting up
1
Connect the VIDEO OUT and AUDIO
OUT L/R jacks to a set of A/V inputs on your
TV.
Use the supplied audio/video cable,
connecting the red and white plugs to the
audio outputs and the yellow plug to the video
output. Make sure you match up the left and
right audio outputs with their corresponding
inputs for correct stereo sound.
See below if you want to use a component or
S-video cable for the video connection.
2
Connect the supplied AC power cable to
the AC IN inlet, then plug into a power
outlet.
Note
• Before unplugging the player from the
power outlet, make sure you first switch it
into standby using either the front panel
STANDBY/ON button, or the remote
control, and wait of the -OFF- message to
disappear from the player's display.
• For the above reasons, do not plug this
player into a switched power supply found
on some amplifiers and AV receivers.
12
En
Connecting using a SCART AV
cable
A SCART-type AV connector is provided for
connection to a TV or AV receiver. The video
output is switchable between ordinary
composite and RGB. See AV Connector Out on
page 36 for how to set it.
The SCART AV connector also outputs analog
audio, so there is no need to also connect the
AUDIO OUT L/R jacks.
SCART
TV
AUDIO OUT
VIDEO OUT
L
R
Y
NT VIDEO OUT
1
Use a SCART cable (not supplied) to
connect the AV CONNECTOR (RGB) output
to a SCART AV input on your TV (or AV
receiver).
AV CONNECTOR (RGB) TV/AV Receiver