Pioneer DV-393-S Manual de Instruções - Página 43

Procurar online ou descarregar pdf Manual de Instruções para Leitor de DVD Pioneer DV-393-S. Pioneer DV-393-S 48 páginas. Pioneer operating instruction dvd player dv-393-s dv-490v-s
Também para Pioneer DV-393-S: Manual de Instruções (48 páginas), Manual de Instruções (48 páginas), Manual de Instruções (48 páginas)

Imprimir página

Additional information

Selecting languages using the

language code list

Some of the language options (such as 'DVD

Language' in the Setup Navigator) allow you to

set your preferred language from any of the 136

languages listed in the language code list on

page 46.

HDMI troubleshooting (DV-490V)

Incorrect operation is often mistaken for trouble or malfunction. If you think that there is

something wrong with this component, check the points below. Sometimes the trouble may lie in

another component. Inspect the other components and electrical appliances being used. If the

trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized

service center or your dealer to carry out repair work.

Problem

No HDMI audio output.

Remedy

• This unit has been designed to be compliant with HDMI (High

Deﬁnition Multimedia Interface). Depending on the component you

have connected, unreliable signal transfers may result.

• If the front panel HDMI indicator is lit:

– You won't hear any sound from the HDMI output if the source

component is only DVI/HDCP-compatible.

• If the front panel HDMI indicator is unlit then:

– Make sure that you've selected this player as the HDMI input in the

settings for the component you're using. You may need to refer to the

instruction manual of the component to do this.

– Check that the HDMI cable is connected properly and that the cable

isn't damaged.

– Check that components connected using the HDMI interface are

switched on and HDMI compatible.

Select 'Other Language'.

Use the

(cursor left/right) buttons

to select either a code letter or a code

number.

Use the

(cursor up/down) buttons

to select a code letter or a code number.

See Language code list on page 46 for a

complete list of languages and codes.