Pioneer ]S-2EX Manual de Instruções - Página 2

Procurar online ou descarregar pdf Manual de Instruções para Sistema de altifalantes Pioneer ]S-2EX. Pioneer ]S-2EX 26 páginas. Pioneer speaker system operating instructions
Também para Pioneer ]S-2EX: Catálogo (20 páginas), Brochura e especificações (16 páginas), Manual de serviço (10 páginas)

Imprimir página

1. Specifications

Thank you for buying this Pioneer product. Please read

through these operating instructions so you will know how to

operate your model properly. After you have finished reading

the instructions, put them away in a safe place for future

reference.

What's in the box

• Speaker spikes

(with attached nuts) x4

• Long fastening screws

(for grille) x2

• Finishing screws (for

grille) x4

Features of this speaker system

• Construction follows leading-edge TAD technology

• Beryllium dual-concentric tweeter

• Aramid/carbon fiber reinforced composite 18 cm woofer

• Perfect time alignment design

Before you start

• The nominal impedance of this speaker system is 6 Ω.

Connect the speaker system to an amplifier with a load

impedance ranging from 4 Ω to 16 Ω (a model with

"4 – 16 Ω" displayed on the speaker output terminals).

• Do not touch the speaker cones as they are easily

damaged.

In order to prevent damage to the speaker system resulting

from input overload, please observe the following precau-

tions:

• Do not supply power to the speaker system in excess of

the maximum permissible input.

• When connecting or disconnecting anything in your AV

system, make sure the amplifier is switched off.

• When using a graphic equalizer to emphasize loud

sounds in the high-frequency range, do not use exces-

sive amplifier volume.

• Do not try to force a low-powered amplifier to produce

loud volumes of sound (the amplifier's harmonic

distortion will be increased, and you may damage the

speaker).

• Spike bases x4

• Short fastening screws

(for grille) x2

• Caps x10

• Grille x1

• Operating instructions

Caution: installation

• Do not place the speaker on an unstable surface. It

could present a hazard if it falls, as well as damaging the

equipment. If placing the speaker on a thick carpet, we

recommend using the supplied speaker spikes for

stability.

• Switch off and unplug your AV equipment and consult

the instructions when connecting up components. Make

sure you use the correct connecting cables.

• Do not put a TV or other AV equipment on top of this

speaker. It could present a hazard if it falls, as well as

damaging the equipment.

• Do not install your speakers overhead on the ceiling or

wall. If improperly attached, the speaker grille can fall

and cause damage or personal injury.

• Do not attach these speakers to the wall or ceiling. They

may fall off and cause injury.

Caution: in use

• Do not use the speaker to output distorted sound for

long periods of times. This can result in a fire hazard.

• Do not sit or stand on the speaker, or let children play on

the speaker.

• Do not put large or heavy objects on top of the speaker.

WARNING: Handling the cord on this product or

cords associated with accessories sold with the

product will expose you to chemicals listed on

proposition 65 known to the State of California and

other governmental entities to cause cancer and

birth defect or other reproductive harm.

Wash hands after handling

Installing your speaker

Please observe the following points when installing speakers:

• These speakers are bookshelf-type speakers which will

give their best performance when placed on a solid,

level surface off the floor. Placing the speakers directly

on the floor will result in boomy, undefined sound.

Ideally, the tweeters should be at about ear level when

seated in your listening position. We recommend using

the CP-2EX speaker stand for optimal sound and stability.

If you choose to use the CP-2EX speaker stand, make sure

you secure it with the screws provided.

• Sounds played through speaker systems are easily

affected in subtle ways by the conditions in the listening

space.

• For good sound, the speaker should be about 20 cm

away from the back wall and at least 50 cm away from

the side wall. If the room has a lot of reverberation, we

recommend hanging heavy fabric on the walls, and/or

putting a carpet on the floor to damp the sound. For best

results, cover walls completely.

D36-P4_A_En