Pioneer SW501 - Powered Subwoofer Instruções de utilização

Procurar online ou descarregar pdf Instruções de utilização para Sistema de altifalantes Pioneer SW501 - Powered Subwoofer. Pioneer SW501 - Powered Subwoofer 2 páginas. Powered subwoofer
Também para Pioneer SW501 - Powered Subwoofer: Especificações (1 páginas), Especificações (1 páginas), Manual de serviço (37 páginas)

Imprimir página

Pioneer SW501 - Powered Subwoofer Instruções de utilização

Operating Instructions

Mode d'emploi

Thank you for buying this PIONEER product. Please read through these operating instructions so you will know how to operate

English

your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the

explanatory drawings. However, the method of connecting and operating the unit is the same.

IMPORTANT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol,

CAUTION:

TO PREVENT THE RISK OF ELECTRIC

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS

"dangerous voltage" within the product's

enclosure that may be of sufficient

INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

magnitude to constitute a risk of electric

shock to persons.

Read these instructions.

11)

Only use attachments/accessories specified by the

Keep these instructions.

manufacturer.

Heed all warnings.

12)

Use only with the cart, stand, tripod, bracket, or table

Follow all instructions.

specified by the manufacturer, or sold with the

Do not use this apparatus near water.

apparatus. When a cart is used, use caution when

Clean only with dry cloth.

moving the cart/apparatus combination to avoid

Do not block any ventilation openings. Install in

injury from tip-over.

accordance with the manufacturer's

instructions.

Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

13)

Unplug this apparatus during lightning storms or

blades with one wider than the other. A

when unused for long periods of time.

grounding type plug has two blades and a third

14)

Refer all servicing to qualified service personnel.

grounding prong. The wide blade or the third

Servicing is required when the apparatus has been

prong are provided for your safety. If the provided

damaged in any way, such as power-supply cord or

plug does not fit into your outlet, consult an

plug is damaged, liquid has been spilled or objects

electrician for replacement of the obsolete outlet.

have fallen into the apparatus, the apparatus has

10)

Protect the power cord from being walked on or

been exposed to rain or moisture, does not operate

pinched particularly at plugs, convenience

normally, or has been dropped.

receptacles, and the point where they exit from

the apparatus.

VENTILATION CAUTION

POWER-CORD CAUTION

When installing this unit, make sure to leave space

Handle the power cord by the plug. Do not pull out the

around the unit for ventilation to improve heat

plug by tugging the cord and never touch the power

radiation (at least 25 cm at top, 15 cm at rear, and

cord when your hands are wet as this could cause a

10 cm at each side).

short circuit or electric shock. Do not place the unit, a

WARNING

piece of furniture, etc., on the power cord, or pinch the

Slots and openings in the cabinet are provided for

cord. Never make a knot in the cord or tie it with other

ventilation to ensure reliable operation of the

cords. The power cords should be routed such that they

product, and to protect it from overheating. To

are not likely to be stepped on. A damaged power cord

can cause a fire or give you an electrical shock. Check

prevent fire hazard, the openings should never be

the power cord once in a while. When you find it

blocked or covered with items (such as newspapers,

table-cloths, curtains) or by operating the

damaged, ask your nearest PIONEER authorized

equipment on thick carpet or a bed.

service center or your dealer for a replacement.

D3-4-2-1-7b_A_En

This product contains mercury. Disposal of this

WARNING

material may be regulated due to environmental

To prevent a fire hazard, do not place any naked

considerations. For disposal or recycling information,

flame sources (such as a lighted candle) on the

please contact your local authorities or the Electronics

equipment.

D3-4-2-1-7a_A_En

Industries Alliance : www.eiae.org.

WARNING

This equipment is not waterproof. To prevent a fire

Before plugging in for the first time, read the following

or shock hazard, do not place any container filled

section carefully.

with liquid near this equipment (such as a vase or

The voltage of the available power supply differs

flower pot) or expose it to dripping, splashing, rain

according to country or region. Be sure that the

or moisture.

power supply voltage of the area where this unit

D3-4-2-1-3_B_En

will be used meets the required voltage (e.g., 230 V

or 120 V) written on the rear panel.

ACCESSORY ITEMS

• RCA plug cord x1

• Operating instructions

PANEL FACILITIES

FRONT PANEL

STANDBY/ON

REAR PANEL

POWER

MAX

VOLUME

MIN

200 Hz

CROSSOVER

50 Hz

BYPASS

OFF

PHASE

AUTO

STANDBY

OFF

LINE LEVEL

OUTPUT

INPUT

1 Power Indicator (STANDBY/ON)

Lights blue when the power has been switched ON.

When AUTO

STANDBY switch is set to ON, lights blue whenever the speaker receive

an audio signal. If the power is switched OFF only briefly, the indicator

lights blue when power is restored. If no signal is present for more than

12 minutes, the subwoofer automatically reverts to standby mode and the

power indicator lights red. If, subsequently, a signal is received, power

automatically comes back on and the power indicator lights blue.

NOTE:

• If you are planning on switching the unit OFF for a long period of

time, make sure to check that the indicator light has gone out after

switching OFF.

2 Power switch (POWER)

Switches the subwoofer between ON and OFF.

3 Volume knob (VOLUME)

Sets the subwoofer volume.

• Turn the knob slowly from the MIN position.

• With this unit, the bass level can be independently set, so do not

turn up the bass on the AV amplifier.

4 Crossover knob (CROSSOVER)

When using the subwoofer, set the upper frequency limit for the

subwoofer (50 Hz to 200 Hz) so that it complements the output from

your other speakers.

When using the bass management features of an AV receiver, set to

BYPASS ON in order to use the low-pass filter of the AV receiver for

high quality sound.

5 Bypass switch (BYPASS)

When set to ON, the audio signal is routed to the woofer unit,

bypassing the amplifier's crossover circuit.

6 Phase switch (PHASE 0º /180º)

When set to 180º, the output phase becomes the reverse of the input

S-W301/S-W501/S-W601

POWERED SUBWOOFER

ENCEINTE ACTIVE D'EXTREMES GRAVES

If the AC plug of this unit does not match the AC

outlet you want to use, the plug must be removed

and appropriate one fitted. Replacement and

mounting of an AC plug on the power supply cord of

this unit should be performed only by qualified

service personnel. If connected to an AC outlet, the

The exclamation point within an equilateral

cut-off plug can cause severe electrical shock. Make

triangle is intended to alert the user to the

sure it is properly disposed of after removal.

presence of important operating and

The equipment should be disconnected by removing

maintenance (servicing) instructions in the

the mains plug from the wall socket when left

literature accompanying the appliance.

unused for a long period of time (for example, when

D3-4-2-1-1_En-A

on vacation).

CAUTION

The POWER switch on this unit will not completely

shut off all power from the AC outlet. Since the

power cord serves as the main disconnect device for

the unit, you will need to unplug it from the AC outlet

to shut down all power. Therefore, make sure the

unit has been installed so that the power cord can

be easily unplugged from the AC outlet in case of an

accident. To avoid fire hazard, the power cord should

also be unplugged from the AC outlet when left

unused for a long period of time (for example, when

on vacation).

This product is for general household purposes. Any

failure due to use for other than household purposes

(such as long-term use for business purposes in a

restaurant or use in a car or ship) and which

requires repair will be charged for even during the

warranty period.

WARNING: Handling the cord on this product or

cords associated with accessories sold with the

product will expose you to chemicals listed on

proposition 65 known to the State of California and

other governmental entities to cause cancer and

P1-4-2-2_En

birth defect or other reproductive harm.

Operating Environment

Operating environment temperature and humidity:

+5 ºC to +35 ºC (+41 ºF to +95 ºF); less than 85 %RH

(cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in

locations exposed to high humidity or direct sunlight (or

strong artificial light)

For U.S. Model

S002*_En

K057_En

D3-4-2-1-4_A_En

FEATURES

n 150 W (S-W301)/170 W (S-W501)/180 W (S-W601) (RMS) power with

AB class amplifier that serves audio and video software playback

such as Dolby Digital with a wide dynamic range.

n Equipped with 20 cm (S-W301)/25 cm (S-W501)/30 cm (S-W601) driver

n Crossover frequency can be set to 50 Hz to 200 Hz.

signal, and when set to 0º, it is in the same phase as the input signal.

• Normally, the switch is set to 0º.

But when the sound connection between the subwoofer and the

left and right speakers sounds unnatural, try switching to 180º

and set the switch in the position where the sound is natural.

• When using two or more subwoofers together, make sure that the

phase switch of all of them are set to the same position.

7 Auto Standby switch (AUTO STANDBY)

Switches the Auto Standby feature on/off.

When switched ON (the default setting is OFF), the Auto Standby

feature becomes active. In this mode, if there is no input signal for 12

minutes the system automatically switches to standby. The power is

automatically switched on again if an input signal is

NOTE:

There may be cases where a connected component outputs noise or

some other non-audio signal which causes this system to

automatically power on when in Auto Standby mode. If this happens,

switch off the Auto Standby mode and switch the system on/off

manually.

8 Line Level Input terminal (LINE LEVEL INPUT)

Connect to the SUBWOOFER PREOUT terminal of an amplifier or

receiver, with the specially provided RCA plug cord.

9 Line Level Output terminal (LINE LEVEL OUTPUT)

Used for connecting other equipment through the amplifier. The

signal output from this jack is not affected in any way by the settings

of the various controls on the unit.

10 AC CORD

Connect the AC cord to a AC socket (in the room).

CONNECTIONS

Before making or changing any connections, switch off the power

and disconnect both this unit and the amplifier/receiver from the

AC outlet.

LINE LEVEL CONNECTION

Rear Panel

Supplied RCA plug cord

This connection is for an amplifier or receiver equipped with a

SUBWOOFER PREOUT terminal. Connect to the LINE LEVEL INPUT

terminal on this unit, using the specially provided RCA plug cord.

NOTE:

• When connected to the PREOUT terminal for surround center

channel on the amplifier or receiver, the bass is heard only on the

center channel, so it will be insufficient.

OPERATION

For details regarding operating part functions, refer to PANEL

FACILITIES above.

1. Turn the POWER switch (2) ON.

• If the unit's power cord is connected to a switched AC outlet on

the amplifier or receiver and the switch is left ON, the unit can be

turned ON/OFF together with the amplifier or receiver.

• If the unit cannot be connected to the amplifier or receiver, turn

the power to the amplifier or receiver ON before turning the power

to the unit ON. When turning the power OFF, turn the power to the

unit OFF before turning the power to the amplifier or receiver OFF.

2. Operate the amplifier or receiver and adjust the volume of the

other speakers.

3. Adjust the volume of the bass with the VOLUME knob (3).

• When necessary, operate the CROSSOVER knob (4) and PHASE

switch (6), and then adjust with the VOLUME knob (3).

4. Turn the POWER switch (2) OFF.

• The power indicator disappears.

IN COMBINATION WITH SPEAKERS

The frequency characteristics of the S-W301/S-W501/S-W601 combined

with small-size speakers are shown below. As shown in these figures,

the low frequency range is improved.

• These special characteristics are obtained in an echoless chamber.

The effect of an additional S-W301/S-W501/S-W601 in an ordinary

listening room is better than the chart indicates when positioned

adequately.

Small-size speakers + S-W301/S-W501/S-W601

FREQUENCY (Hz)

• With playback of Dolby Digital, establishment of a special channel

for the subwoofer is recommended; and with playback of LFE (Low

Frequency Effect: sound effect like the rumbling of the earth, whose

D3-4-2-2-1a_A_En

purpose is to intensify the force of the video), the S-W301/S-W501/S-

W601 is especially effective.

INSTALLATION

Speaker Installation

• Subwoofer Installation Criteria

D3-4-2-2-2a_A_En

K041_En

The subwoofer plays back the bass in monaural, making use of the fact

that the human ear is not very sensitive to the direction of low-pitched

sound. Because of this, the subwoofer can be installed almost

D36-P4_A_En

anywhere. If it is installed too far away, however, the sound from the

other speakers may become unnatural.

• An example of speaker positioning

D3-4-2-1-7c_A_En

NOTES:

• Position the left and right channel speakers at equal distances from

the TV set and approximately 1.8 meters (6 ft.) from each other.

• Install the center speaker above or below the TV so that the sound of

the center channel is localized at the TV screen.

TROUBLESHOOTING

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the

points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the

trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your dealer to carry

out repair work.

SYMPTOM

1 No power is being supplied

(Indicator does not light up when

power switch is turned on.)

2 No sound

detected.

(Indicator is lit.)

3 Sound is distorted.

4 Howling noise occurs.

5 Much noise when listening to

AM or FM broadcasts.

SPECIFICATIONS

Cabinet .....................Bass-reflex, floor-standing type

Speaker

S-W301.............................................20 cm cone type

S-W501.............................................25 cm cone type

S-W601.............................................30 cm cone type

Power Amplifier Continuous Power Output (RMS)

S-W301........................................150 W/6 Ω (100 Hz)

S-W501........................................170 W/6 Ω (100 Hz)

S-W601........................................180 W/6 Ω (100 Hz)

Input (sensitivity at 100 Hz)

LINE LEVEL (RCA jack) ..................................200 mV

Output (Level at 100 Hz)

LINE LEVEL (RCA jack) ..................................200 mV

Selectable CROSSOVER Frequencies

.............................................................. 50 Hz to 200 Hz

Outline Dimension

S-W301

.............. 360 mm (W) x 360 mm (H) x 398.5 mm (D)

14.2 in. (W) x 14.2 in. (H) x 15.7 in. (D)

S-W501

.............. 360 mm (W) x 380 mm (H) x 418.5 mm (D)

14.2 in. (W) x 15.0 in. (H) x 16.5 in. (D)

S-W601

.............. 360 mm (W) x 430 mm (H) x 438.5 mm (D)

14.2 in. (W) x 16.9 in. (H) x 17.3 in. (D)

Weight (without package)

S-W301......................................... 14.6 kg/32 lb. 4 oz.

S-W501......................................... 15.6 kg/34 lb. 7 oz.

S-W601....................................... 17.2 kg/37 lb. 15 oz.

Power Requirements................................120 V, 60 Hz

Power Consumption...........................................144 W

Power Consumption in standby .........................0.5 W

Accessories......................................RCA plug cord x1

Operating instructions

Specifications and design subject to possible

modification without notice, due to

improvements.

is a trademark placed on a product with

Pioneer's Phase Control technology. This technology

enables high-grade sound reproduction through

each component by improving overall phase matching.

Published by Pioneer Corporation.

• The rear (surround) speakers are most effective when installed in

parallel locations directly to the side, or slightly behind, the listener,

at a level about 1 meter (3.3 ft.) above the listener's ears.

CAUTION:

When installing the center speaker on top of the TV, be sure to

secure it with tape or some other suitable means.

Otherwise, the speaker may fall from the TV due to external shocks

such as earthquakes, and it may lead to endangering those nearby

or damaging the speaker.

Installation Precautions

• Do not attach the subwoofer to the wall or ceiling. They may fall off

and cause injury.

• Install the unit in a well-ventilated location where it will not be

Small-size speakers

exposed to high temperatures and high humidity.

• Do not place the unit near stoves or other heating equipment or at

locations exposed to direct sunlight, as these can have an adverse

effect on the cabinet and internal components. Also, do not install

the unit where there is too much dust or high humidity, as these can

cause malfunctioning or breakdowns. (Avoid cooking tables and

other locations where the unit would be exposed to heat, steam and

soot.)

• Do not place heavy or large objects on top of the speaker. Doing so

could provoke the speaker to fall, causing damages or bodily injury.

If speakers fall from their installation locations, they may suffer

irreparable cracks in their finish.

• Keep the unit away from devices such as cassette decks which are

sensitive to magnetic fields.

1 Left speaker

The subwoofer is not magnetically shielded and so should not be

placed near a TV or monitor. Magnetic storage media (such as

2 Right speaker

floppy discs and tape or video cassettes) should also not be kept

3 Recommended

close to the subwoofer.

installation range

for the subwoofer

• Do not place the speaker on an unstable surface, as doing so may

4 Listening position

cause the speaker to fall and cause damage or bodily injury.

• Do not place cups, glasses, or other containers with fluids on top of

the units, since the units may be damaged if the liquid spills.

• The installation location selected should have a sturdy floor surface.

Mounting the speaker on a long-pile carpet should be avoided, since

the carpet may touch the driver's diaphram, causing distorted

sound.

• Please install this unit away from the antenna cable of the tuner, as

noise can be caused with installation close to the antenna cable. In

such a case, use this unit at a position away from the antenna and

the antenna cable, or when playback of extra bass is not required,

switch off the power for this unit.

1 Front left speaker

2 Center speaker

MAINTENANCE OF EXTERNAL SURFACES:

3 Front right speaker

• Clean the surface by wiping with a soft, dry cloth.

4 Subwoofer

• When the surfaces are very dirty, wipe with a soft cloth dipped in

some neutral cleanser diluted five or six times with water, and

5 Listening area

wrung out well, and then wipe again with a dry cloth. Do not use

6 Rear left speaker

furniture wax or cleaners.

7 Rear right speaker

• Never use thinners, benzine, insecticide sprays and other

chemicals on or near this unit, since these will corrode the

surfaces.

CAUSE

• Power supply plug is not correctly

• Insert plug securely.

inserted.

• Connection of accessory RCA plug

• Check again and connect correctly.

cord is wrong or disconnected.

• VOLUME knob is set to MIN.

• Turn clockwise slowly.

• Level is too high.

• Turn the VOLUME knob counter-clockwise to lower the level.

• Input level is too high.

• Turn the amplifier's output level (volume, bass control, bass

boost) counter-clockwise to lower the level.

• No power supplied to the amplifier.

• Connect an amplifier and supply power.

• Subwoofer level is set too high.

• Place the subwoofer a good distance from speakers. Turn the

VOLUME knob counter-clockwise to lower the volume.

• The AM loop antenna or the FM indoor

• Increase the distance between the AM or FM antenna (for

antenna is close to this unit.

indoor use) and this unit.

Selecting fine audio equipment such as the unit

you've just purchased is only the start of your

musical enjoyment. Now it's time to consider how

you can maximize the fun and excitement your

equipment offers. This manufacturer and the

Electronic Industries Association's Consumer

Electronics Group want you to get the most out of

your equipment by playing it at a safe level. One that

lets the sound come through loud and clear without

annoying blaring or distortion-and, most importantly,

without affecting your sensitive hearing.

Sound can be deceiving. Over time your hearing

"comfort level" adapts to higher volumes of sound.

So what sounds "normal" can actually be loud and

harmful to your hearing. Guard against this by

setting your equipment at a safe level BEFORE your

hearing adapts.

To establish a safe level:

• Start your volume control at a low setting.

• Slowly increase the sound until you can hear it

comfortably and clearly, and without distortion.

Once you have established a comfortable sound

level:

• Set the dial and leave it there.

Taking a minute to do this now will help to prevent

hearing damage or loss in the future. After all, we

want you listening for a lifetime.

PIONEER CORPORATION

4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC.

P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300

PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.

Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270

K002_B_En

REMEDY

We Want You Listening For A Lifetime

Used wisely, your new sound equipment will

provide a lifetime of fun and enjoyment. Since

hearing damage from loud noise is often

undetectable until it is too late, this manufacturer

and the Electronic Industries Association's

Consumer Electronics Group recommend you avoid

prolonged exposure to excessive noise. This list of

sound levels is included for your protection.

Decibel

Level Example

Quiet library, soft whispers

Living room, refrigerator, bedroom away from traffic

Light traffic, normal conversation, quiet office

Air conditioner at 20 feet, sewing machine

Vacuum cleaner, hair dryer, noisy restaurant

Average city traffic, garbage disposals, alarm clock

at two feet.

THE FOLLOWING NOISES CAN BE DANGEROUS

UNDER CONSTANT EXPOSURE

Subway, motorcycle, truck traffic, lawn mower

100

Garbage truck, chain saw, pneumatic drill

120

Rock band concert in front of speakers,

thunderclap

140

Gunshot blast, jet plane

180

Rocket launching pad

Information courtesy of the Deafness Research Foundation.

S001_En