Pioneer AVD-W9000 Manual do Proprietário - Página 9
Procurar online ou descarregar pdf Manual do Proprietário para Monitor Pioneer AVD-W9000. Pioneer AVD-W9000 44 páginas. 9 inch wide xga display
Imprimir página
Operating this unit
Basic Operations
Power ON/OFF
Turning the unit on
% Press SRC/POWER to turn the unit on.
When you select a source, the unit is turned
on.
Turning the unit off
% Press SRC/POWER and hold until the
unit turns off.
Note
Take off your headphones when turning the dis-
play unit on or off. If you leave your headphones
on, a noise may be heard when the volume is
high.
Selecting a source
You can select a source you want to listen to.
% Press SRC/POWER to select a source.
Press SRC/POWER repeatedly to switch be-
tween the following sources.
VCR1 [COMPONENT] (VCR1 (COMPONENT))
or VCR1 (VCR1)—VCR2 (VCR2)
Notes
! This unit is equipped with two video inputs,
VCR1 IN (VCR1 input) and VCR2 IN (VCR2
input).
VCR1 IN (VCR1 input) has a component video
input (VCR1 [COMPONENT]) as well as an
RCA video input (VCR1).
! VCR1 [COMPONENT] is a component video
from the AV device connected to COMPO-
NENT (component input) of VCR1 IN (VCR1
input).
! In VCR1 IN (VCR1 input), COMPONENT (com-
ponent input) is given priority over RCA input
when both inputs are connected at the same
time.
! A video input terminal which is not connected
cannot be selected.
! VCR1 is selected when no connection is made
for both VCR1 IN (VCR1 input) and VCR2 IN
(VCR2 input).
Adjusting the volume
You can adjust both the built-in speaker vo-
lume and the headphone volume.
! Audio does not output from the built-in
speaker when headphones are connected.
% Press VOL DOWN or VOL UP to adjust
the sound level.
Changing the wide screen mode
You can select a desired mode for enlarging a
4:3 picture to a 16:9 one.
% Press WIDE/MENU to select the desired
setting.
Press WIDE/MENU repeatedly to switch be-
tween the following settings:
AUTO (auto)—FULL (full)—JUST (just)—
CINEMA (cinema)—ZOOM (zoom)—
NORMAL (normal)
# You can select AUTO only when selecting
VCR1 [COMPONENT] as the source.
AUTO (auto)
When wide mode information is included in the
video signal, the wide mode adjusts automatically
according to the information.
FULL (full)
A 4:3 picture is enlarged in the horizontal direc-
tion only, giving you a 4:3 TV picture (normal pic-
ture) without any omissions.
Section
03
9
En