Pioneer PDP505CMX - HD Plasma Display Manual de referência de comandos - Página 3

Procurar online ou descarregar pdf Manual de referência de comandos para Monitor Pioneer PDP505CMX - HD Plasma Display. Pioneer PDP505CMX - HD Plasma Display 23 páginas. 50-inch wxga professional plasma display
Também para Pioneer PDP505CMX - HD Plasma Display: Brochura e especificações (8 páginas), Manual de serviço (23 páginas)

Imprimir página
Pioneer PDP505CMX - HD Plasma Display Manual de referência de comandos
1.2 Interface
1) Connector
D-sub 9 pins (male)
2) Pin layout
Pin No.
Signal
1
NC (not connected)
2
TxD (Transmit Data)
3
RxD (Receive Data)
4
NC (not connected)
5
GND
3) Baud Rate
9600 bps (standard)
(switch-able to 1200, 2400, 4800, 19200, 38400 bps)
Note
The panel's baud rate should be set to match the computer's baud rate.
Also, when extending the RS-232C cable over a long distance, lower the baud rate.
4) Data format
Start: 1 bit
Data: 8 bit
Parity: 0 (no parity)
Stop: 1 bit
5) Connection
Control PC
(with D25 serial port )
2
RXD 3
3
TXD 2
2
CTS 5
GND 7
* D-sub 9-pin/D-sub 25-pin conversion tables are now available on the market.
6) Protocol
From the computer to the display
(1) When sending one command at a time:
STX (02 hex)
ID (2 Byte)
(2) When numerical direct commands are possible:
STX (02 hex)
ID (2 Byte)
COMMAND: 3 Byte (ASCII)
ARGUMERNT: 3 Byte (ASCII)
(3) Echo back
STX (02 hex)
COMMAND (3 Byte or 6 Byte)
When the received command is a numerical direct effect command, numerical data is returned.
STX (02 hex)
COMMAND (3 Byte)
When the received command is invalid, 'ERR' is returned.
STX (02 hex)
When the received command cannot be processed (when PON is received, when the power
is already ON, etc.), 'XXX' is returned.
STX (02 hex)
Pin No.
6
NC (not connected)
7
NC (not connected)
8
RTS (Request To Send)
9
NC (not connected)
Plasma Display
(PDP-505CMX/50MXE10/50MXE11)
(PDP-504CMX/50MXE1/50MXE1-S)
(PDP-434CMX/43MXE1/43MXE1-S)
2 TXD
3 RXD
8 RTS
5 GND
COMMAND (3 Byte or 6 Byte)
COMMAND (3 Byte)
ARGUMENT (3 Byte)
ERR (3 Byte)
ETX (03 hex)
XXX (3 Byte)
ETX (03 hex)
RS-232C Adjustment Mode
Signal
Control PC
(with D9 serial port)
(with D9 serial port)
RXD 2
TXD 3
CTS 8
GND 5
ETX (03 hex)
ARGUMENT (3 Byte)
ETX (03 hex)
ETX (03 hex)
ETX (03 hex)
1
5
6
9
Plasma Display
(PDP-505CMX/50MXE10/50MXE11)
(PDP-504CMX/50MXE1/50MXE1-S)
(PDP-434CMX/43MXE1/43MXE1-S)
2
2 TXD
3
3 RXD
2
8 RTS
5 GND
Straight Cable
3