Ariston LSFO 3T223 W X Manual de referência diário - Página 21
Procurar online ou descarregar pdf Manual de referência diário para Máquina de lavar loiça Ariston LSFO 3T223 W X. Ariston LSFO 3T223 W X 25 páginas.
Imprimir página
LOADING THE RACKS
UPPER RACK
Load delicate and light dishes: glasses, cups,
saucers, low salad bowls.
The upper rack has tip-up supports which
can be used in a vertical position when
arranging tea/ dessert saucers or in a lower
position to load bowls and food containers.
(loading example for the upper rack)
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper basket can be adjusted:
high position to place bulky crockery in the
lower basket and low position to make the most
of the tip-up compartments by creating more
space upwards.
The upper rack is equipped with a Upper Rack
height adjuster (see figure), without pressing
the levers, lift it up by simply holding the rack
sides, as soon as the rack is stable in its upper
position. To restore to the lower position, press
the levers (A) at the sides of the rack and move the basket downwards.
We strongly recommend that you do not adjust the height of the
rack when it is loaded.
NEVER raise or lower the basket on one side only.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable flaps can be fold or unfold to
optimize the arrangement of crockery inside
the rack.
Wine glasses can be placed safely in the folda-
ble flaps by inserting the stem of each glass into
the corresponding slots.
Depending on the model:
- to unfold the flaps there is needed to slide it
up and rotate or release it from the snaps and
pull it down.
- to fold the flaps there is needed to rotate it
and slide flaps down or pull it up and attach
flaps to the snaps.
LOWER RACK
For pots, lids, plates, salad bowls, cutlery
etc... Large plates and lids should ideally be
placed at the sides to avoid interferences
with the spray arm.
(loading example for the lower rack)
The lower rack has a Space Zone A, a special pull-out support in the
rear of the rack that can be used to support frying pans or baking pans
in upright position, thus taking up less space.
In order to use it, just get hold of the coloured grip and pull it upwards
B while rotating it forward. The supports can slide right and left to fit
the size of the crockery.
A
B
The lower rack has tip-up supports C which can be used in a vertical
position when arranging plates or in a horizontal position (lower) to
load pans and salad bowls easily.
CUTLERY BASKET
It is fitted with top grids for improved cutlery arrangement.
It must only be positioned at the front of the lower rack.
Knives and other utensils with sharp edges must be placed in the
cutlery basket with the points facing downwards or they must be po-
sitioned horizontally in the tip-up compartments on the upper rack.
ZONE WASH 3D
Zone Wash 3D uses additional water jets loca-
ted both: in the lower and upper part of the
dishwasher (marked with orange color) to
wash more intensively heavily soiled items by
increasing water coverage on dishes.
Example: Load pots and casseroles facing
lower part of Zone Wash 3D components
and activate the 3D Zone Wash option on the
panel.
C
EN
5