Aeotec Siren 6 Manual de início rápido - Página 4

Procurar online ou descarregar pdf Manual de início rápido para Acessórios Aeotec Siren 6. Aeotec Siren 6 7 páginas. Indoor siren
Também para Aeotec Siren 6: Manual do utilizador (6 páginas), Manual de início rápido (10 páginas)

Imprimir página
Aeotec Siren 6 Manual de início rápido

Quick Start.

Getting your Siren up and running is as simple as plugging it into a wall socket and linking it to your
existing Z-Wave network. The following instructions tell you how to link your Siren to your Z-Wave
network.
Install Mounting plate in the location of your choice.
1. Affix Siren 6 Wall Mount Plate in any desired location near an outlet.
a. Use 3x 20mm screws or double-sided tape.
b. Lock the Siren 6 into place where the mount is installed.
Pairing your Siren 6 into your existing Z-Wave network.
1. Power Siren 6 through the provided power adapter.
2. Ensure that Siren 6 LED is blinking slowly.
3. Set your Z-Wave gateway into pair / add device mode. (Refer to your Z-Wave gateway/controller
instruction manual on how to set it into pair mode).
4. Tap the Siren 6 Action Button once (quick). (If your gateway supports S2 encryption, enter the
first 5 digits of the DSK into your Z-Wave gateway interface to complete S2 encrypted pairing, DSK
is printed on the Siren 6 unit).
5. If Siren 6 has successfully paired to your Z-Wave gateway, the LED on Siren 6 will emit a solid
color for 30 seconds, then turn off. If in the case that the Siren 6 failed to pair, LED will continue to
blink slowly.